Milwaukee® 2902-20 Brushless Cordless Hammer Drill, 1/2 in Single Sleeve Ratcheting Chuck, 18 V DC, 0 to 550/0 to 1800 rpm No-Load, Li-Ion Battery
The M18™ 1/2 in. brushless hammer drill/driver delivers the most power in its class while maintaining compact size. This hammer drill driver 725 in-lbs of torque and 0-550 / 0-1,800 RPM, for a wide range of drilling and fastening applications. The Milwaukee built brushless motor, REDLINK™ electronics and REDLITHIUM™ batteries provides more efficient power delivery, for fewer trips to the charger. At only 7.0 in. long and 4.6 lbs. (with battery), this hammer drill provides excellent control and balance in a compact size, perfect for work overhead or in tight spaces. An all-metal gear case and 1/2 in. metal chuck provides maximum durability.
-
BrandMilwaukee®
-
UPC045242502738
-
Manufacturer Part Number2902-20
-
CountryUSA|Canada
-
Chuck Size1/2 in
-
Chuck TypeSingle Sleeve Ratcheting
-
Torque Rating725 in-lb
-
ColorBlack/Red
-
TypeBrushless
-
Handle TypeT-Handle
-
Voltage Rating18 V DC
-
Control TypeVariable Speed
-
No-Load Speed0 to 550/0 to 1800 rpm
-
Housing MaterialGlass Filled Nylon
-
Bare Tool/KitKit
-
Battery Capacity4 Ah
-
Battery IncludedNo
-
Battery TypeLi-Ion
-
Dimensions7 in L x 2.31 in W x 8 in H
-
Number of Speeds2
-
Blows per Minute0 to 31500 bpm
- Compact design provides excellent balance and control, ideal for overhead applications or work in tight spaces
- All metal gear case and 1/2 in metal chuck provide maximum impact and shock durability
- Milwaukee® brushless motor - optimized for efficiency, this motor delivers more run-time and longer life
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 488D91 |
| Grainger | 488D91 |
| Grainger | 488D91 |
-
Alternative Part Number14280327
-
UNSPSC27112703
-
IDEA Index ID14280327
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant
-
Owners/User Manual
Recently Viewed
Milwaukee® 2902-20 Brushless Cordless Hammer Drill, 1/2 in Single Sleeve Ratcheting Chuck, 18 V DC, 0 to 550/0 to 1800 rpm No-Load, Li-Ion Battery
The M18™ 1/2 in. brushless hammer drill/driver delivers the most power in its class while maintaining compact size. This hammer drill driver 725 in-lbs of torque and 0-550 / 0-1,800 RPM, for a wide range of drilling and fastening applications. The Milwaukee built brushless motor, REDLINK™ electronics and REDLITHIUM™ batteries provides more efficient power delivery, for fewer trips to the charger. At only 7.0 in. long and 4.6 lbs. (with battery), this hammer drill provides excellent control and balance in a compact size, perfect for work overhead or in tight spaces. An all-metal gear case and 1/2 in. metal chuck provides maximum durability.
Gates® Power Transmission Tri-Power® BX270 Banded Heavy Duty Cut Notch V-Belt, BX Section, 21/32 in W Top, 272 in L Outside, 13/32 in THK, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
On the worksite, campsite or the side of the road, the EAL17 lantern is a stainless steel designed lantern that can either illuminate your space or alert people in times of need. Cycle between high, low, solid red and flashing red modes to best suit your situation. (4 x D batteries not included). With COAST® commitment to quality, the EAL17 lantern is impact-resistant, weather-resistant and its LEDs are virtually unbreakable. The EAL17 lantern is backed by COAST® 5-years warranty against defects in materials and workmanship.
Made from low carbon steel and tapered 1/4 in/ft. Pins are mainly used for hole alignment in maintenance machinery. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy to store. The Precision Brand® 100-piece taper pin Assortment contains: (3) #0 x 3/4 in, (3) #0 x 1 in, (5) #0 x 1-1/4 in, (5) #0 x 1-1/2 in, (3) #0 x 1-3/4 in, (3) #1 x 3/4 in, (5) #1 x 1 in, (5) #1 x 1-1/4 in, (5) #1 x 1-1/2 in, (3) #1 x 1-3/4 in, (3) #1 x 2 in, (3) #2 x 3/4 in, (3) #2 x 1 in, (5) #2 x 1-1/4 in, (5) #2 x 1-1/2 in, (3) #2 x 1-3/4 in, (5) #2 x 2 in, (3) #2 x 2-1/4 in, (5) #3 x 1 in, (5) #3 x 1-1/4 in, (5) #3 x 1-1/2 in, (5) #3 x 1-3/4 in, (5) #3 x 2 in, (3) #3 x 2-1/4 in, (3) #3 x 2-1/2 in, (3) #3 x 2-3/4 in, (3) #3 x 3 in, (3) #4 x 1 in, (3) #4 x 1-1/4 in, (3) #4 x 1-1/2 in, (5) #4 x 1-3/4 in, (3) #4 x 2 in, (3) #4 x 2-1/4 in, (3) #4 x 2-3/4 in, (3) #4 x 3 in, (3) #5 x 1-1/2 in, (5) #5 x 1-3/4 in, (3) #5 x 2 in, (3) #5 x 2-1/4 in, (3) #5 x 2-1/2 in, (3) #5 x 2-3/4 in, (3) #5 x 3 in, (3) #6 x 1-1/2 in, (3) #6 x 1-3/4 in, (3) #6 x 2 in, (3) #6 x 2-1/4 in, (3) #6 x 2-3/4 in and (3) #6 x 3 in.
2-RIB POLY-V V-BELTS-PIX180J2>
JOURNAL ROLLER BEARING 38E12-GULWRA99210 >
