Hydraulic Bar Cutters
7/8" X 1-3/4" X 13" CORED BAR-FEB7/8X13/4X13 >
5/8" X 1-1/8" X 13" CORED BAR-FEB5/8X11/8X13 >
3" X 4-1/2" X 13" BRONZE BARS-FEB3X41/2X13 >
3" -IDX3-3/4" -ODX13" BRONZE BAR-FEB3X33/4X13 >
3" -IDX3-1/2" -ODX13" BRONZE BAR-FEB3X31/2X13 >
3/4" -IDX2" -ODX13" BRONZE BARS-FEB3/4X2X13 >
3/4" X 2-1/4" X 13" BRONZE BARS-FEB3/4X21/4X13 >
3/4" X 1-1/8" X 13" BRONZE BARS-FEB3/4X11/8X13 >
3/4" X 1-1/4" X 13" CORED BAR-FEB3/4X11/4X13 >
3/4" X 1-1/2" X 13" BRONZE BARS-FEB3/4X11/2X13 >
3-1/2" -IDX5" -ODX13" BRONZE BAR-FEB31/2X5X13 >
3-1/2" -IDX4" -ODX13" BRONZE BAR-FEB31/2X4X13 >
2" X 3" X 13" BRONZE BARS-FEB2X3X13 >
2" X 2-3/4" X 13" BRONZE BARS-FEB2X23/4X13 >
2-1/4" -IDX4" -ODX13" CORED BARS-FEB21/4X4X13 >
2-1/4" -IDX3" -OD CORED BARS-FEB21/4X3X13 >
2-1/2" -IDX3" -ODX13" CORED BARS-FEB21/2X3X13 >
2-1/2" X 3-1/2" X 13" CORED BARS-FEB21/2X31/2X13 >
1" -IDX2" -OD BRONZE CORED BARS-FEB1X2X13 >
1X1-3/4X13 1"-ID X 1-3/4"-OD Brass Cored
1"-ID X 1-3/4"-OD BRASS CORED BAR - FEB1X13/4X13>
1" X 1-1/2" X 13" CORED BAR-FEB1X11/2X13 >
1-3/4" X 3" X 13" CORED BARS-FEB13/4X3X13 >
1-3/4" X 2-3/4" X 13" CORED BARS-FEB13/4X23/4X13 >
1-1/4" X 2" X 13" CORED BAR-FEB11/4X2X13 >
Recently Viewed
3.25" -OOVERALL LENGTH COMPRESSION SPRING; MAXIMUM LOAD 43.59 LBS.-AJA32 >
AnvilĀ® 0310088000 FIG 1125 Reducer, Coupling, 1-1/4 x 1/2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
MAXCO Inspire Seriesā¢ 100 Conn Link Cotter Pin Type, ASME/ANSI Standard Roller Chain, Single Strand, 1-1/4ā³ Pitch
2.25" -OVERALL LENGTH EXTENSION SPRINGS; MAXIMUM LOAD 4.45 LBS.-AJA3 >
GreenleeĀ® 12099 Adapter Screw, For Use With Slug-BusterĀ® Knockout Punch Kit and Ratchet Punch Driver Kit, 3/4-16 x 5/8-18
GreenleeĀ® 12099 Adapter Screw, For Use With Slug-BusterĀ® Knockout Punch Kit and Ratchet Punch Driver Kit, 3/4-16 x 5/8-18
10-MM X 1/4" 6-PT STANDARD SQUARE DRIVE SOCKET-APX10MM11 >
