25-RIV-10-FT-CH #25 Riveted Roller Chain (ft)
#25 RIVETED ROLLER CHAIN (FT)-BRW25RIV10FTCH >
Recently Viewed
#25 RIVETED ROLLER CHAIN (FT)-BRW25RIV10FTCH >
2-LB. RUBBER MALLET, WITH A FIBERGLASS HANDLE-ARS69490 >
REED knows how to cut a good thread and high speed steel (HSS) R12+ Segmental Dies show this with cutting edges manufactured in-house by precision CNC machinery. The 1/2" through 2" die segments are available in NPT. The segmental die design enables smooth chip flow and easy cutting. R12+ die sets are replaceable parts for REED R12+ Dropheads, as well as the following RIDGID® dropheads: 12-R, 00-R, 111-R, 0-R, 11-R, 30A and 31A threaders. Segmental dies are sold in full sets of four.NOTE: Available only in right-hand configuration.
Minimum Number of Clips: A minimum of 3 clips must be applied to securely form a wire rope eye or termination loop. Torque Requirement: The nuts must be tightened evenly to a minimum torque of 95 ft-lbs to prevent cable slippage .Rope Turn-Back: You must allow for exactly 12 inches of cable turn-back from the base of the eye to ensure adequate length for clip placement. Efficiency Rating: Properly installed clips on 9/16" wire rope yield an 80% efficiency rating based on the catalog breaking strength of the wire rope.
HS-251-5/8X6 CROSBY 5/8"X6" STUB END TURNBUCKLE
Working Load Limit (WLL): 7,200 lbs (3.6 tons) for straight or in-line pulls. Thread / Shank Diameter: 7/8 inch. Take-Up Length: 6 inches. Closed Length: 18 inches. Weight: 4.78 lbs per unit.
4.5" X 16" HEX SHANK CLAY SPADES-BSHHS1822 >
