2042CL Metric Roller Chain Connecting Links ISO#
METRIC ROLLER CHAIN CONNECTING LINKS ISO# 08B-2-AMT2042-CL >
Recently Viewed
METRIC ROLLER CHAIN CONNECTING LINKS ISO# 08B-2-AMT2042-CL >
7/16' X 2' X 21/32" HEX DRIVE NUTSETTERS, 6" POINT MAGNETIC-APXM6N08142 >
John Guest® PSEI012024 Male Connector, Adapter, 1/2 in Nominal, CTS x MNPT End Style, Polysulfone, Domestic
The Speedfit secure range of fittings ensures a secure connection when adapting Speedfit Pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread (refer to tape manufacturers recommendations), working up the full thread length. The fitting can be tightened using a spanner on the hexagon area at the middle of the component. Do not over-tighten the fitting. To lock pipe in place, push the pipe into the fitting and turn the nut clockwise. Should the need arise to release the pipe, turn the locking nut anti-clockwise, push the collet towards the fitting and pull the pipe to release.
5/8" X 144 SAE ZINC THREADED ROD-NBS9980621200 >
DP-2190-B 5/16" X 4.25" U-BOLT-NTL222299 >
Browning® TorqTaper® Plus PE0005 Type SMTP Shaft Mount Reducer, Solid Shaft Input, Tapered Bore Output, 1 hp, 15:1 Gear Ratio, 116.67 rpm Maximum Output, 36.013 in-lb Input/540.19 in-lb Output Torque Rating
Shaft mount reducers are enclosed helical gear reducers with a hollow output. They are mounted directly on the input shaft of the driven machine and are supported by the shaft and torque arm arrangement or motor mount frame. This eliminates the need for additional components to transmit torque from the reducer to the equipment.
