Streamlight® 77175 Battery Stick, 6 V DC Nominal, NiCd Battery, For Use With UltraStinger®, SL-20XP® LED, SL-20L®, SL-20LP® and SuperStinger® Flashlights
Streamlight® 77175 Battery Stick, 6 VDC Nominal, NiCd Battery, For Use With UltraStinger®, SL-20XP® LED, SL-20L®, SL-20LP® and SuperStinger® Flashlights
-
BrandStreamlight®
-
UPC080926771758
-
Manufacturer Part Number77175
-
CountryUSA
-
Recharge Time10 hr
-
Nominal Voltage6 V DC
-
Battery Capacity1600 mAh
-
Battery TypeNiCd
-
Suitable For Use WithUltraStinger®, SL-20XP® LED, SL-20L®, SL-20LP® and SuperStinger® Flashlights
- Water resistant operation
-
UNSPSC39101600
-
Package DescriptionEACH
Recently Viewed
Streamlight® 77175 Battery Stick, 6 V DC Nominal, NiCd Battery, For Use With UltraStinger®, SL-20XP® LED, SL-20L®, SL-20LP® and SuperStinger® Flashlights
Streamlight® 77175 Battery Stick, 6 VDC Nominal, NiCd Battery, For Use With UltraStinger®, SL-20XP® LED, SL-20L®, SL-20LP® and SuperStinger® Flashlights
MORSE® 33818 2068 General Purpose Straight Flute Hand Tap, Right Hand Cutting, #5-40 Thread, H2 Thread Limit, Bottoming Chamfer, 3 Flutes, Bright, HSS
MORSE® 33818 2068 General Purpose Straight Flute Hand Tap, Right Hand Cutting, #5-40 Thread, H2 Thread Limit, Bottoming Chamfer, 3 Flutes, Bright, HSS
Mayhew™ 21502 PRO™ Extra Long Pin Punch, 1/4 in Hex Punch, 7-7/8 in OAL, Alloy Steel
Mayhew™ 21502 PRO™ Extra Long Pin Punch, 1/4 in Hex Punch, 7-7/8 in OAL, Alloy Steel
Hougen® Rotabroach® 12214 12000 Annular Cutter, 7/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Gator® GatorGrit 3314 Coated Sanding Sheet, 11 in L x 9 in W, 320 Grit, Garnet Abrasive, Paper Backing
Gator® GatorGrit 3314 Coated Sanding Sheet, 11 in L x 9 in W, 320 Grit, Garnet Abrasive, Paper Backing
Drillco 31E120BC 3100E Adjustable Round Split Die, M12x1.25 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.

