GASKETS
Size: 12-inch nominal pipe size Style: Full Face (FF) — covers the entire face of the flange and includes bolt holes Thickness: 1/16-inch (0.0625") Material options: Commonly cut from Teadit compressed non-asbestos fiber sheet (such as aramid/Nitrile rubber NA-1001) or other standard industrial sheet packing.
Size: 12 inches nominal pipe size Style: Full Face (FF) – covers the entire face of the flange and includes bolt holes Thickness: 1/16 inch Material: Compressed non-asbestos fiber sheet (such as Teadit 1001 aramid/synthetic fiber with NBR binder) or similar standard Gasket material designation.
1/8" GARLOCK 3200 GASKET MATERIAL-TEA102018SQIN >
3/32" X 59" X 63" GASKET MATERIAL-TEA1001332>
DO-NUT GASKETS-
1/8" GASKET MATERIAL (SQ/IN)-TEA100118SQIN >
1/8" X 59" X 63" GASKET MATERIAL-TEA100118 >
1/64" X 59" X 63" GASKET MATERIAL-TEA1001164 >
1/32" X 59" X 63" GASKET MATERIAL-TEA1001132 >
Thickness
1/16
Filler/Binder Material
Nitrile Rubber (NBR)
Sheet Material
Teadit NA 1001
Material
Aramid Fiber
Country of Origin
Unrestricted Origin
Weight
1.254322
RING GASKETS-TEA10RR>
FLANGE GASKET-TEA10FFR>
FLANGE GASKET-TEA10FFG>
RING GASKET
RING GASKET-TEA1GR>
FLANGE GASKET
RING GASKETS-TEA11/2RR>
FLANGE GASKET-TEA11/2FFR>
NEO GASKETS-TEA11/2FFN>
1-1/2" GASKET-TEA11/2FFG>
Recently Viewed
PIX B-94 IS A CLASSICAL V-BELT, 97" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIB
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB94 >
PIX B-91 IS A CLASSICAL V-BELT, 94" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIB
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB91 >
3.25" -OVERALL LENGTH COMPRESSION SPRINGS; MAXIMUM LOAD 7.16" LBS.-AJA55 >
6" STERILE COTTON TIP SWABS--PK/200-OFIM556 >
55-MM-ID X 63-MM-OD BUNA-N O-RINGS-CUSH4X55>
1-3/8" ID FL-OD INSERT BEARINGS-BCANPC106RPC>
