12-FF-R-1/16 12" Full Face Red Rubber Gaskets
Size: 12-inch nominal pipe size Style: Full Face (FF) — covers the entire face of the flange and includes bolt holes Thickness: 1/16-inch (0.0625") Material options: Commonly cut from Teadit compressed non-asbestos fiber sheet (such as aramid/Nitrile rubber NA-1001) or other standard industrial sheet packing.
Recently Viewed
Size: 12-inch nominal pipe size Style: Full Face (FF) — covers the entire face of the flange and includes bolt holes Thickness: 1/16-inch (0.0625") Material options: Commonly cut from Teadit compressed non-asbestos fiber sheet (such as aramid/Nitrile rubber NA-1001) or other standard industrial sheet packing.
ITM TH25316 Bit Screwdriver, #3/16 Point, 1 in OAL
24-MM X 1.50 ULTRA-FINE HEX NUT-MET934824UF >
400-LUMEN LED HIGH POWER FLASHLIGHT - NEB6000>
20" X 63-GAUGE X 5000' STRETCH FILM - JWHXMP52063 >
Koyo NTA-2031 Inch Series Caged Round Bore Single Row Thrust Needle Roller and Cage Assembly, 1-1/4 in Dia Bore, 1.937 in OD, 0.0781 in W, 1-1/4 in Dia Shaft, High Carbon Chrome Steel Bearing/Carbon Steel Cage
Thrust Needle Roller and Cage Assemblies are the complements of small diameter needle rollers, arranged in spoke-like configuration. Needle rollers are equally spaced means of cage, its web section separates the rollers and provides guidance to keep them tracking in an orbital path. The purpose of these assemblies is to transmit a thrust load between two relatively rotating objects while greatly reducing friction. Thrust Needle Roller and Cage Assemblies also can be utilized with lipped washer to serve as raceway surface for the needle rollers. Washers can be supplied separately or can be mechanically unitized to the Thrust Needle Roller and Cage Assemblies for ease of handling.
