1848-007 NIBCO
CPVC CAPS-NIB1848007>
Recently Viewed
CPVC CAPS-NIB1848007>
2-3/8" SOCKET-PEFW83240>
Milwaukee® 48-20-5060 Heavy Duty Thin Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6162 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
Klein® KHHTOPPAD2 Premium Replacement Top Pad, For Use With Hard Hat and Safety Helmet, Polyester
Klein® KARBN™ premium Top Pads work with Klein® hard hats and safety helmets. The Top Pad helps reduce pressure and prevents straps digging into the top of your head. They are made with advanced evaporative cooling material. Simply wet, shake away excess water for hours of cooling.
CORD AND CABLE CONNECTOR, 3/4" HUB 7/8" X 1-38, .625 - .750 CABLE RANGE-APLCG6275 >
CAL/SPREADERS-PEFW08111>
