BANJO FITTINGS & ACCESSORIES
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi
Banjo 1 inch Mpt x 1/8 inch Female, Polypropylene Thread Red Bushing
RB-075-025 BANJO Pipe Reducer Bushing Fitting - 3/4" MPT x 1/4" FPT
3/4" MALE THREADX1/4" FEMALE THREAD POLY REDUCING BUSHING
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPTthreads.
Pressure to 150 P.S.I. at 70°F.
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi
NIP-400-SH BANJO Polypropylene, 4", Schedule 80, 300 psi Max Pressure
Material Plastic, glass reinforced polypropylene
Brand Generic
Color Black
Item dimensions L x W x H 4.5 x 4.5 x 5.5 inches
Connector Type Nipple
Thread Size 4 inch
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPTthreads.
Pressure to 150 P.S.I. at 70°F.
1-1/2"-MPT X 5" POLY PIPE NIPPLES-BAJNIP1505 >
1-1/4"-MPT X 6" POLY PIPE NIPPLES-BAJNIP1256 >
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPTthreads.
Maximum operating pressure 300 psi
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPTthreads.
Maximum operating pressure 300 psi
Family: Manifold Flange Connections
Type: Tank-Fitting
Style: Bottom Drain
Size: 3"
Weight 2.131 lbs.
Glass reinforced polypropylene
EDPM gaskets
Manifold gasket not included
Glass reinforced polypropylene
EDPM gaskets
Manifold gasket not included
3/4"-MPT X 3/8"-BARB NYLON TEES-GL-MT3438>
3/4"-MPT X 3/4"-BARB NYLON TEES-GL-MT3434>
3/4"-MPT X 1/2"-BARB NYLON TEES-GLMT3412>
1/2"-MPT X 3/4"-BARB NYLON TEES-GL-MT1234>
1"-MPT X 3/8"-BARB NYLON TEES-GLMT1038>
1"-MPT X 3/4"-BARB NYLON TEES-GL-MT1034>
1"-MPT X 1/2"-BARB NYLON TEES-GL-MT1012>
Strain your sprayer lines with the BANJO 200 STANDARD FLANGE T- STRAINER - LESS SCREEN replacement part. Designed with a poly body to keep your sprayer clean from tank debris and other obstructions to keep a consistent flow.
Recently Viewed
11" DOUBLE END NAIL PULLER - JWH345458>
B-Line Clevis Hanger, Standard, Series: B3100, 8 in Pipe, 3/4-1 Rod, 2000 lb, Steel, Plain, 12-3/4 in H, 650 deg F
EATON 10250TM80 Standard Legend Plate With Multiple Conduit Plate, 0.1 in H x 1.6 in W, Half Round Plate, Aluminum/Die Cast Zinc, Black Field
Eaton's 10250T line of 30.5 mm pushbuttons features a heavy-duty zinc die cast construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the buildup of liquid inside the operator, which can prevent operation in freezing environments.
1/4" -FEMALE PIPE THREAD FULL PORT BALL VALVE-NIBT5851/4 >
Browning® 1078195 Split Taper Bushing, 3/8 in Dia Bore, 1.57 in Small End/1.625 in Large End Dia Barrel, 2-1/2 in Dia Flange, 1-1/4 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
MVP® sheaves are a series of angular faced center flanges which are bolted to the fixed flange mounted on the barrel. They also contain another series of angular faced flanges which are bolted to the end flange and threaded locking collar. When the threaded locking collar is turned clockwise, it moves the angular flanges closer together increasing the pitch diameter. When the collar is moved counterclockwise, the flanges are moved apart, decreasing the pitch diameter. The pitch diameter is infinite. This means the collar adjustment can be turned and stopped at any time regardless of location between the minimum and the maximum setting. When the desired diameter is obtained, the locking collar is locked by tightening screws. In contrast VL, VP, and VM sheaves are limited by half- turn or 180 deg adjustment points.
