BANJO FITTINGS & ACCESSORIES
LST-150-50 BANJO Polypropylene T-Strainer, 50 Mesh, 1-1/2" NPT Female
1-1/2" X 1-1/2" TEE STRAINER WITH 50 STAINLESS STEEL MESH SCREEN
LST-150 BANJO Polypropylene T-Strainer, 50 Mesh, 1-1/2" NPT Female
50 MESH STRAINER REPLACEMENT SCREEN FOR LST075 & LST100-BAJLST150 >
LST-125-50 BANJO 1ÂĽ" X 1ÂĽ" T Strainer With 50 Mesh Stainless Steel Screen
316 stainless steel reinforced screens.
Clean-out plug.
EPDM gaskets.
Heavy-duty glass reinforced polypropylene.
Maximum operating pressure 300 psi
½" drain plug in bottom of cap.
3" female NPT threads.
75 P.S.I. maximum.*
Constructed of glass filled polypropylene.
High volume.
Lightweight.
Reinforced 304 stainless steel screen.
MINI T-STRAINER EPDM GASKET
LS-T-1550 BANJO 1¼" & 1½" Line Strainer 50 Mesh Stainless Steel
Replacement Part for T Line Strainer | 1-1/4" & 1-1/2" 50 Mesh Screen
| Replacement Part for Manifold Flange Connections | 2" Gasket | Bowl Seal for LS150/LS200 | Gasket: FKM (Viton)
Banjo 100 Mesh Stainless Steel Screen for 3/4" & 1" T-Line Strainers fits LST075-50 & LST100-50 Strain your sprayer lines with the Banjo 50 Mesh Screen. Replacement screen for 3/4" and 1" strainers. Built of polypropylene casing and stainless- steel mesh to keep your sprayer lines clean from tank debris and other obstructions to keep a consistent flow.
T Line Strainer
LST Series
Polypropylene
Green
LS-T-050-H BANJO 1/2" Strainer Head for LSTM050-C - LSTM050 - LSTM075-C - LSTM075
The Banjo LSTM050 series refers to a lineup of high-quality 1/2-inch Polypropylene Mini T-Line Strainers manufactured by Banjo Corporation. These heavy-duty, glass-reinforced inline filters protect fluid handling equipment, pumps, and spray nozzles from debris.
1-1/2" - 2" 80-MESH SCREEN FOR Y-STRAINER
1-1/2" - 2" 50-MESH SCREEN FOR WYE STRAINERS
1-1/2" - 2" 30-MESH SCREEN FOR Y-STRAINER
Standard Mesh Data (For General Use ONLY): 20 Mesh, 841 Microns, 0.016" Wire Diameter, 0.034" Opening Size, 46.2% Open Area.
Replacement screens replace existing inline strainer screens due to wear, damage, or planned maintenance
2" X 2" WYE STRAINER WITH 8" MESH POLY RIBBED STAINLESS STEEL SCREEN
1-1/2" - 2" O-RING REPLACEMENT SEAL FOR WYE STRAINERS
STRAINER CAPSWYE Y-STRAINER 1-1/2"/2" END CAPS
LS-125-80 BANJO 1ÂĽ" X 1ÂĽ" Y Strainer With 80 Mesh Stainless Steel Screens
1-1/4" X 1-1/4" WYE STRAINER WITH 80 MESH STAINLESS STEEL SCREEN-BAJLS12580 >
LS-050-80 BANJO ½" X ½" Y Strainer With 80 Mesh Stainless Steel Screen
Maximum operating pressure 225 psi
Clean-out plug.
Corrosion resistant.
Easy grip end cap.
EPDM gaskets.
Female NPT &mdash: Female NPT.
Fiberglass reinforced.
Heavy duty end cap threads.
Lightweight.
Poly ribbed 316 stainless steel screen.
Precision molded construction.
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Manufacturer:
Banjo
Fitting Connection Size:
0.25
Fitting Connection Size 2:
0.25
Fitting Connection Type:
Hose Barb
Fitting Connection Type 2:
Hose Barb
Material:
Polypropylene
HB-T-150-100 BANJO 1½" Hose Barb X 1½" Hose Barb X 1" Male Thread Hose Barb Tee
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPTthreads.
Pressure to 150 P.S.I. at 70°F.
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPTthreads.
Pressure to 150 P.S.I. at 70°F.
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPTthreads.
Pressure to 150 P.S.I. at 70°F.
Recently Viewed
Proto® DuraTek™ JC31608R Screwdriver, 3/16 in Cabinet/Slotted Point, Alloy Steel Shank, 12-1/4 in OAL, Black Oxide/Polished Chrome, ASME B107.15
MORSE® 32328 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/4-7 Thread, H4 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
ISOSTATIC™ Oilube® 401340 Round Bore Sleeve Bearing, 1 in Dia Bore, 1-5/16 in OD, 2 in W
DRILLCO 1000N152 Imperial Silver and Deming Drill, 13/16 in Drill - Fraction, 0.8125 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
Energizer® ECR2450BP Coin Battery, Lithium-Manganese Dioxide, 3 V Nominal, 620 mAh Nominal, 2450
Energizer® ECR2450BP Coin Battery, Lithium-Manganese Dioxide, 3 V Nominal, 620 mAh Nominal, 2450
The Holcutters™, are not hole saws. They're precision ground, heat treated tools that easily cut thru the stock rather than ripping, tearing and pushing thru as do typical hole saws. They can produce holes three times faster and cleaner than hole saws in sheet metal and have dramatically extend tool life, too. All sizes have a "shoulder" to prevent plunge-thru, which is especially useful when drilling into live electrical boxes.
