Oatey® Knock-Out™ 33463 Inset Test Cap, 4 in Dia, ABS, White
Oatey® Knock-Out™ 39103 Test Cap With Barcode, 4 in Dia, 10 psi, PVC, White
-
BrandOatey®
-
UPC038753334639
-
Manufacturer Part Number33463
-
CountryUSA|Canada
-
MaterialABS
-
ColorWhite
-
TypeInset
-
Diameter4 in
-
Working Pressure10 psi
- Solvent welds to schedule 40 ABS and PVC DWV pipe
- Deeper design provides stronger leak free connections
- Tab feature keeps hands free of solvent cement
- Withstands 10 PSI or 30 ft of head pressure
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | O33463 |
-
UNSPSC40141700
-
Package DescriptionBOX
-
Standards/ApprovalsPROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
Oatey® Knock-Out™ 39103 Test Cap With Barcode, 4 in Dia, 10 psi, PVC, White
Reed 05610 R12+ Segmental Die, 1 in NPT Thread, Right Thread, 4 Pieces, HSS
REED knows how to cut a good thread and high speed steel (HSS) R12+ Segmental Dies show this with cutting edges manufactured in-house by precision CNC machinery. The 1/2" through 2" die segments are available in NPT. The segmental die design enables smooth chip flow and easy cutting. R12+ die sets are replaceable parts for REED R12+ Dropheads, as well as the following RIDGID® dropheads: 12-R, 00-R, 111-R, 0-R, 11-R, 30A and 31A threaders. Segmental dies are sold in full sets of four.NOTE: Available only in right-hand configuration.
Leviton® 2630 Grounding Locking Receptacle, 277 V AC, 30 A, 2 Poles, 3 Wires, Black
Leviton® industrial grade locking devices are built to provide unparalleled quality and superior performance in the most severe industrial settings. Leviton® combines the best materials available with superior production standards to produce a broad selection of locking devices of unmatched flexibility and dependability.
1/4" HEX INSERT BIT, SCREW SIZE 14F-16R, 1-1/2"-APX4456X >
Milwaukee® 48-20-5160 Heavy Duty Thick Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5175 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
1 GANG SINGLE WHITE 1.406" HOLE DEVICE RECEPTACLE WALL PLATE, STANDARD SIZE, THERMOSET DEVICE MOUNT-LEV88004 >
