Tubular S-Traps
Keeney 270WK S-Trap, 1-1/4 in Inlet x 1-1/4 in Outlet, Polypropylene, Slip Joint Connection
Keeney 270WK S-Trap, 1-1/4 in Inlet x 1-1/4 in Outlet, Polypropylene, Slip Joint Connection
Recently Viewed
MORSE® 31168 1195 Adjustable Round Split Threading Die, 5/16-18 UNC Thread, 3/8 in THK, 1 in OD Die, Carbon Steel
MORSE® 31168 1195 Adjustable Round Split Threading Die, 5/16-18 UNC Thread, 3/8 in THK, 1 in OD Die, Carbon Steel
10" SINGLE HOOK-NTL180844>
Milwaukee® 48-20-5030 Heavy Duty Thin Wall Core Bit, 1-3/4 in Drill - Fraction, 1.75 in Drill - Decimal Inch, Carbide
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
For the Enclosed Ratchet Threader Sets, the dies and dropheads are manufactured on CNC machines for cutting precision during the threading process. Sets contain enclosed dropheads and a ratchet handle in a compact, reinforced plastic carrying case. The dropheads are the lightest available, size for size. The enclosed dropheads in these sets can be used manually or with the REED 601PD Power Drive. To replace a drophead, refer to REED Enclosed Dropheads. Dropheads for pipe sizes up through 1-1/4" are interchangeable with RIDGID® 11-R and R200, Super-Ego® 600, Virax® 1362, Rothenberger™ Super Cut hand ratchet threaders and Supertronic portable power threaders.
ALUMINUM PIPE WRENCH-RGL67291 >
