Plumbing Drains & Traps Accessories
B&KĀ® 995-000 Dishwasher Air Gap, For Use With Predrilled Kitchen Sink Holes, Plastic
B&K's Dishwasher Air Gap with Chrome finish is used to ensure that waste water is not siphoned back into the fresh water supplied to the appliance. An air gap also provides an alternate water drainage route in the event that the drain hose is clogged, water may flow directly into the sink. Required by many local plumbing codes.
Fernco's Wax Free Toilet Seal is the only toilet seal that allows you to feel the seal. As you lower the toilet onto the flange, you can feel the unique sealing ribs compress and seal against the inside walls of the drain pipe. No mess and no guess- just the confidence in a reliable seal. After all, it's made by Fernco.
FerncoĀ® FUS-2 Wax-Free Urinal Seal, For Use With 2 in Drain Pipe, PVC, Black, Domestic
FerncoĀ® FUS-2 Wax-Free Urinal Seal, For Use With 2 in Drain Pipe, PVC, Black, Domestic
Molded and Fabricated Solvent Weld Sewer Fittings are made from superior quality PVC and are injection molded or fabricated using the most advanced technology available and are as solid and reliable as our PVC solvent weld sewer pipe.
Jones Stephens⢠P21150 Provent, 1-1/2 in MNPT, ABS
Jones Stephens⢠P49015 Countersunk Cleanout Plug, 1-1/2 in, Plastic, White, Domestic
Jones Stephens⢠P49015 Countersunk Cleanout Plug, 1-1/2 in, Plastic, White, Domestic
Jones Stephens⢠P49025 Countersunk Cleanout Plug, 2-1/2 in, Plastic, White, Domestic
Jones Stephens⢠P49025 Countersunk Cleanout Plug, 2-1/2 in, Plastic, White, Domestic
Keeney 681K 1-Piece Cleanout Plug, 5 in, Import
Sioux Chief PushTite⢠887-GPTMK Installation Kit, Domestic
Sioux Chief PushTite⢠887-GPTMK Installation Kit, Domestic
Sioux Chief Raise-A-Ring⢠886-R Spacer/Extension Ring, ABS
Installers use Sioux Chief's spacer and repair rings to repair or adapt closet flanges for specific applications, such as when new or thicker flooring is added. The Quick Spacer⢠installs under the flange, while the Raise-A-Ring⢠is typically set on top of the flange, and can be stacked if necessary. For repairs to cracked or broken flanges, installers can fit Sioux Chief's stainless steel Ringer⢠over the damaged flange and fasten it to the floor. Also available is a two-piece repair ring, designed to replace rusted or broken metal swivel rings without replacing the plastic portion of the flange.
Recently Viewed
GEARWRENCHĀ® 85201 Double Box End Wrench, 5/16 x 3/8 in, 7/16 x 1/2 in Wrench, 12 Points, 0 deg Offset, 6.3 in OAL, High Alloy Steel, Polished Chrome
The GEARWRENCH QuadBox⢠double box ratcheting wrenches give you 4 sizes on 1 wrench, reducing your tool count and making more space in your tool box. Each box end has two usable sizes, one on either side, and levers on either end to swap the wrench's ratcheting direction without removing the wrench. The ratcheting box end is designed to need as little as 5° of swing arc to move fasteners, versus 30° for standard wrenches. These wrenches are also made from a strong alloy steel with a bright, full polish chrome finish. Each ratcheting box end features an off-corner loading design for a better grip on the fastener and reduced fastener rounding. The 0° offset on both ends of the wrench provides greater access to fasteners in the tightest spaces.
10-POCKET ELECTRICIANS TOOL POUCH-KLE5190 >
MarkalĀ® 086562 ThermomeltĀ® Temperature Indicator, 250 deg F, 3/8 in Flat Tip
ThermomeltĀ® HEAT-STIKĀ® markers are a quick, low-cost method to accurately measure surface temperatures of various metals and equipment. Available in 88 Fahrenheit and 32 Centigrade temperatures, the stick-in-holder design provides convenience and durability for long-lasting use in the workshop or in the field.
SelkirkĀ® by Duravent Ultra-TempĀ® 208800 Type HT Round Top, Fits Duct Size: 10 in, 16 in W x 7 in H Cap
Part of the chimney system roof assembly, the Round Top is designed with a dome to exclude rain and leaves and a lower skirt to deflect wind for proper chimney draft. In the Sure-Temp-Type HT Chimney (5, 6, 7 and 8 in sizes) the Round Top is designed with three legs that slide down over the outside of the chimney. A cinch band is then positioned over the legs and tightened to hold the top firmly in place. This design makes cap removal for cleaning a breeze. In the 10, 12 and 14 in sizes, the Round Top is designed with a squeeze collar that fits inside the chimney pipe. The squeeze collar expands as a set screw is tightened to hold the top firmly in place.
KleinĀ® 68206 Standard Box Wrench, 13/16 x 7/8 in Wrench, 12 Points, 9-1/4 in OAL, Polished Chrome
The Klein Tools Ratcheting Box Wrench is great for working in confined spaces and on long studs. This wrench has a different size opening on each end for multiple applications. Get reverse ratcheting action simply by turning the wrench over.
MarkalĀ® 080224 BĀ® PaintstikĀ® Solid Paint Crayon, 11/16 in Round Tip, Orange