Coilhose® PT1017-50B Polyurethane Tubing, 6.5 mm ID x 10 mm OD x 50 ft L x 1.75 mm THK Wall, 95A Polyurethane, Domestic
Coilhose® PT1017-50B Polyurethane Tubing, 6.5 mm ID x 10 mm OD x 50 ft L x 1.75 mm THK Wall, 95A Polyurethane, Domestic
-
BrandCoilhose®
-
UPC029292902700
-
Manufacturer Part NumberPT1017-50B
-
CountryUSA
-
Temperature Rating-40 to 165 deg F
-
Material95A Polyurethane
-
ColorBlue
-
Wall Thickness1.75 mm
-
Working Pressure170 psi at 75 deg F
-
Inside Diameter6.5 mm
-
Domestic/ImportDomestic
-
Outside Diameter10 mm
-
Length50 ft
- Polyurethane tubing made from an ether (polytetra-methylene glycol ether) based compound, which will not hydrolyze or degrade when exposed to water
- Polyurethane has become a popular choice for tubing due to its extreme flexibility and resistance to kinking
- In addition, it stands up very well to fuels and oils
- Compatible with Coilock fittings and poly-tube fittings
- 28 in hg Vacuum
- 1/8 - 9/16 in +/- 0.005 - 3/4 in +/- 0.007 in Dia tolerance
- UV Stabilized
-
UNSPSC40183008
-
Package Description1/PK
-
Standards/ApprovalsNSF61|UL94HB
-
Catalog
Recently Viewed
Coilhose® PT1017-50B Polyurethane Tubing, 6.5 mm ID x 10 mm OD x 50 ft L x 1.75 mm THK Wall, 95A Polyurethane, Domestic
Coilhose® PT1017-50B Polyurethane Tubing, 6.5 mm ID x 10 mm OD x 50 ft L x 1.75 mm THK Wall, 95A Polyurethane, Domestic
Sealmaster® two and three piece rod end bearing housing designs have been optimized for overall strength. This housing advantage and variety of outer race materials including brass, steel, DELRIN and PTFE liners provide a wide selection of application solutions. Sealmaster® rod end bearings can be joined together or connected with a threaded rod or tube as linkage assemblies for flexibility in motion transfer. In addition Sealmaster® rod end bearings can accommodate angular misalignment to provide ease in assembly and smooth motion transfer in a variety of applications.
7/32" X 7/8" WOODRUFF KEY-MED1014 >
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Smith Bearing® CR-7/8-XB Cylindrical Stud Type Needle Bearing Cam Follower, 7/8 in Dia x 1/2 in W Roller, 3/8 in Dia x 7/8 in L Stud, 52100 Steel Roller
Hex head stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel.
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
