HCI Preferred Supplier 38965 Type B Reinforced Air Brake Tubing, 100 ft L, 0.062 in THK Wall, Nylon
HCI Preferred Supplier 38965 Type B Reinforced Air Brake Tubing, 100 ft L, 0.062 in THK Wall, Nylon
-
BrandGeneric
-
Manufacturer Part Number38965
-
CountryUSA
-
Temperature Rating-40 to 200 deg F
-
MaterialNylon
-
ColorBlack
-
TypeType B Reinforced
-
Wall Thickness0.062 in
-
Working Pressure150 psi
-
Length100 ft
- Superior cold weather flexibility and abrasion resistance
- UV and ozone resistant nylon
- Resistant to attack by Gasoline, diesel fuel and commonly used road and cleaning chemicals
- Air brake tubing available on bulk spools or by packages
-
UNSPSC40183000
-
Package Description1/PK
-
Standards/ApprovalsDOT Requirements|SAE J844|FMVSS No. 106 Brake Hoses and 49 CFR 571.106
-
Catalog
Recently Viewed
HCI Preferred Supplier 38965 Type B Reinforced Air Brake Tubing, 100 ft L, 0.062 in THK Wall, Nylon
HCI Preferred Supplier 38965 Type B Reinforced Air Brake Tubing, 100 ft L, 0.062 in THK Wall, Nylon
Morse® Raider® Plus XI1150 Single Reduction Standard Worm Gear Reducer, C-Face Quilled Input, Double Solid Shaft Output, 1 hp, 60:1 Gear Ratio, 29.1 rpm Maximum Output, 76.13 in-lb Input/29.1 in-lb Output Torque Rating
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
Morse® Raider® Plus XH1177 Single Reduction Standard Worm Gear Reducer, C-Face Quilled Input, Double Solid Shaft Output, 1 hp, 30:1 Gear Ratio, 58.3 rpm Maximum Output, 103.72 in-lb Input/58.3 in-lb Output Torque Rating
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
Gates® Power Transmission Micro-V® 520J10 Heavy Duty V-Belt, J Section, 3/32 in W Top, 52 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
MORSE® 22597 1680 Taper Pin Reamer, #10 Taper Pin, 0.5799 in Dia Small End, Straight Flute, Straight Shank
MORSE® 22597 1680 Taper Pin Reamer, #10 Taper Pin, 0.5799 in Dia Small End, Straight Flute, Straight Shank
Browning® 767632 VPLS 200 Normal Duty Pillow Block Ball Bearing, 1/2 in Dia Bore, 3-3/16 to 4-1/16 in L Bolt Center-to-Center, 1-1/16 in Base to Bore Centerline, 4-7/8 in OAL x 2-3/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
