410120 DO-IT-BEST/HWI PRODUCTS
1/2" X 36" REDI-CUT BLACK PIPE IS THREADED AND HAS THREAD PROTECTOR AT BOTH ENDS. THIS PIPE IS AVAILABLE ON DIRECT ORDERS IN GALVANIZED OR BLACK PIPE. SIZES AVAILABLE ARE 3/8" TO 2" IN 18" TO 60" LENGTHS IN 6" GRADUATIONS-JWH410120 >
Recently Viewed
1/2" X 36" REDI-CUT BLACK PIPE IS THREADED AND HAS THREAD PROTECTOR AT BOTH ENDS. THIS PIPE IS AVAILABLE ON DIRECT ORDERS IN GALVANIZED OR BLACK PIPE. SIZES AVAILABLE ARE 3/8" TO 2" IN 18" TO 60" LENGTHS IN 6" GRADUATIONS-JWH410120 >
Thomson® Super Smart Ball Bushing® SSU12OPN Adjustable Open Linear Bearing, 3/4 in Dia Shaft, 1-1/4 in OD, 1-5/8 in L
The Super Smart Ball Bushing® bearing family represents a major advancement in linear bearing technology worldwide. These patented and universally self-aligning bearings offer twice the load capacity or eight times the travel life of our industry standard Super Ball Bushing® bearing. To minimize installation time and cost, the Super Smart Ball Bushing® bearing can be ordered factory-installed in an industry standard single or twin pillow block.
DeWALT® Powers® 50096-PWR Standard Flat Head Drive Pin, 0.145 in Dia x 2 in L Shank, 0.3 in Dia Head
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
MOP OR BROOM HOLDER-JWH601432 >
Powers™ TempTAP™ 115 Traditional Standard Lavatory Faucet, 1 Handles, 2 gpm Flow Rate
Series 105 and 115 TempTAP™ thermostatic faucets feature an advanced thermal actuator to provide the latest in thermal protection. The single-lever cartridge, with integral ceramic discs, provides both temperature and volume control. TempTAP™ automatically mixes hot and cold water to deliver pre-set water within a specific range. In the event of cold water failure, the thermal actuator virtually shuts off the flow of hot water. TempTAP™ is listed to ASSE 1070, IAPMO cUPC, and NSF 61 Section 9 Annex G.
Thomson® Super Smart Ball Bushing® SSU10 Adjustable Closed Linear Bearing, 5/8 in Dia Shaft, 1-1/8 in OD, 1-1/2 in L
The Super Smart Ball Bushing® bearing family represents a major advancement in linear bearing technology worldwide. These patented and universally self-aligning bearings offer twice the load capacity or eight times the travel life of our industry standard Super Ball Bushing® bearing. To minimize installation time and cost, the Super Smart Ball Bushing® bearing can be ordered factory-installed in an industry standard single or twin pillow block.
