Tigerflex® WST300X100 WST Heavy Duty Liquid Suction Hose, Hose End Style, 100 ft L, 100 psi Working, PVC/Polyester, Domestic
Tigerflex® WST300X100 WST Heavy Duty Liquid Suction Hose, Hose End Style, 100 ft L, 100 psi Working, PVC/Polyester, Domestic
-
BrandTigerflex™
-
UPC822353102602
-
Manufacturer Part NumberWST300X100
-
CountryUSA
-
Temperature Rating-4 to 150 deg F
-
MaterialPVC/Polyester
-
ColorTransparent
-
TypeHeavy Duty
-
SeriesWST
-
Working Pressure100 psi
-
Inside Diameter3 in
-
Domestic/ImportDomestic
-
Outside Diameter3.62 in
-
Length100 ft
-
End StyleHose
- Rigid helix design protects hose tube from cover wear, and allows hose to slide easily over rough surfaces
- Easy-to-handle
- Fabric reinforcement designed with high tensile strength polyester yarn jacket to handle both suction and higher pressure discharge applications
- Phthalate free
- Transparent construction allows for visual confirmation of material flow
-
Package DescriptionEACH
-
Standards/ApprovalsRoHS|EU 2002/95/EC
-
Catalog
-
Service Manual
Recently Viewed
Tigerflex® WST300X100 WST Heavy Duty Liquid Suction Hose, Hose End Style, 100 ft L, 100 psi Working, PVC/Polyester, Domestic
Tigerflex® WST300X100 WST Heavy Duty Liquid Suction Hose, Hose End Style, 100 ft L, 100 psi Working, PVC/Polyester, Domestic
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
MORSE® 22224 1655 Chucking Reamer, 0.4385 in Dia x 7 in OAL, 0.373 in Dia Straight Shank, Straight Flute
Tigerflex® FT300X100 FT Heavy Duty Suction Hose, Hose End Style, 100 ft L, 55 psi Working, PVC Tube, Domestic
Tigerflex® FT300X100 FT Heavy Duty Suction Hose, Hose End Style, 100 ft L, 55 psi Working, PVC Tube, Domestic
