Dixon® AM10 Air King™ Triple Connection Coupling, Iron, Domestic
Dixon® AM10 Air King™ Triple Connection Coupling, Iron, Domestic
-
BrandDixon®
-
Manufacturer Part NumberAM10
-
CountryUSA
-
MaterialIron
-
Pressure Rating150 psi
-
TypeTriple Connection
-
SeriesAir King™
-
Dimensions4-9/32 in L x 3-3/4 in H
-
Domestic/ImportDomestic
- Air king meets pressure requirements as specified in A-A-59553 commercial item description superseding mil Spec.WWC-633D
- Use of supplied safety clip guarantees the fittings are properly connected because the safety pin will not go through the holes in mating fittings until couplings are locked in place
- Only one air king safety clip or wire type retainer is required for each air king universal coupling
- Air king is for air and water service only
- Supplied with AWR4 rubber washer
- Rubber seal
- 150 psi at 70 deg f pressure
- Never use any air king coupling for steam service!
- The use of an air king safety clip or wire type retainer is necessary to ensure air king universal couplings will not become accidentally disconnected
- To provide protection against coupling breakage and related hazards, Dixon recommends the use of a whip hose
- Pressure rating given at ambient temperature 70 deg F
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
| Competitor Name | Cross-Reference Number |
|---|---|
| Ferguson | DAM10 |
-
UNSPSC40141734
-
Package Description25/BX
-
Catalog
Recently Viewed
Dixon® AM10 Air King™ Triple Connection Coupling, Iron, Domestic
Dixon® AM10 Air King™ Triple Connection Coupling, Iron, Domestic
Browning® 767364 VPE 200 Normal Duty Pillow Block Ball Bearing, 1 in Dia Bore, 3-23/32 to 4-17/32 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 5-1/2 in OAL x 2-13/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Apollo™ 10077672 ApolloPress Elbow, Press Elbow, 3/4 in Nominal, Press End Style, Copper
The ApolloPress® 806 Small Diameter Press 45° Elbow features a lead free dezincification resistant copper body and an EPDM o-ring. ApolloPress® products are manufactured utilizing proven ASTM materials and standards. Lead Free Construction Leak Before Press® Technology
Bobrick 4112 ConturaSeries® Soap Dispenser, Satin, 40 fl-oz Capacity, 7 in OAL, Wall Mount, 304 Stainless Steel
Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. Container is satin-finish stainless steel. Capacity: 40-fl oz. Soap refill window. Concealed wall fastening. Hinged filler-top requires special key to open. Vandal-resistant. Unit 7 in W x 6-1/8 in H; 3-5/16 in wall to pushbutton.
HCI Preferred Supplier 18029 Tube Plug, 3/8 in Nominal, Compression End Style, Brass
HCI Preferred Supplier 18029 Tube Plug, 3/8 in Nominal, Compression End Style, Brass
5-GALLON FIBERED PLASTIC ROOF CEMENT - JWH103676 >
