Dixon® GF26 Boss Pipe Nipples, Adapter, 3/4 in, FNPT, Iron/Steel, Domestic
Dixon® GF26 Boss™ Ground Joint Seal, 3/4 in Nominal, FNPT End Style, Iron/Steel, Domestic
-
BrandDixon®
-
Manufacturer Part NumberGF26
-
CountryUSA
-
Temperature Rating450 deg F
-
FinishPlated
-
MaterialIron/Steel
-
Fitting/Connector TypeAdapter
-
Nominal Size3/4 in
-
SeriesBoss™
-
Dimensions3-9/16 in W x 4-15/16 in H
-
Domestic/ImportDomestic
-
End StyleFNPT
- The spud part of the coupling serves as one half of the connection and is usually fixed to the equipment
- The stem part that is clamped to the hose is the other half
- The two halves are connected or disconnected by rotating the wing nut on the spud, when connected they achieve both a mechanical and a pressure seal
- Positive metal-to-polymer seal
- Leakproof seal forms when the metal head of the stem makes contact with the patented polymer seat in the spud
- The non-metallic polymer seat resists most chemicals found in manufacturing facilities, reference the corrosion resistance chart for additional information
- Boss couplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded outlet
- Easy to seal
- Boss couplings are all-purpose hose couplings, universally recommended for steam hose connections, they are also widely used for air, water, fluid petroleum, chemicals and liquid petroleum gas up to 1 in ID
- Boss couplings can be applied to many types of rubber, synthetic, plastic, metallic or semi-metallic hose
- Worn-out hose couplings can be dangerous
- They should be checked regularly and replace when necessary
- Each coupling user should review applications and add safety devices where indicated
- Note: pressurized steam is an extremely dangerous commodity
- Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
- Always follow the manufacturer's product recommendations for pressurized steam handling
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 58DE82 |
-
UNSPSC40175300
-
Package Description1/BX
-
Catalog
Recently Viewed
Dixon® GF26 Boss™ Ground Joint Seal, 3/4 in Nominal, FNPT End Style, Iron/Steel, Domestic
John Guest® Speedfit® Twist & Lock® PEI0320 90 deg Tube Union Elbow, 1/2 in, CTS, Plastic, Domestic
Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40 percent when compared to traditional fixing methods.
Jones Stephens™ G20120 Garden Hose Adapter, 3/4 x 1/2 in, Female Hose Thread x FNPT, Brass
Jones Stephens™ G20120 Garden Hose Adapter, 3/4 x 1/2 in, Female Hose Thread x FNPT, Brass
Charlotte CTS 02300 1800 90 deg Elbow, 3/4 x 1/2 in Nominal, Socket End Style, CPVC, Domestic
FlowGuard Gold CPVC CTS is for hot and cold water distribution. It is for pressure systems where temperatures will not exceed 180 deg F. It can withstand high pressure for long periods, does not rust or corrode,
HYDRAULIC FITTING HY-0810-FJ45T 108574-DAY10RJ48SB >
HYDRAULIC HOSE ENDS HY-0810-FJ90T 108610-DAY10RJ98SB >
