HCI Preferred Supplier 973951 Hose Nipple, 1/4 in Nominal, Barb x MIP, ASTM A-351 316 Stainless Steel
HCI Preferred Supplier 973951 Hose Nipple, 1/4 in Nominal, Barb x MIP, ASTM A-351 316 Stainless Steel
-
BrandGeneric
-
UPC640025037409
-
Manufacturer Part Number973951
-
CountryUSA
-
Temperature Rating-40 to 160 deg F
-
FinishZinc Plated
-
MaterialASTM A-351 316 Stainless Steel
-
Pressure Rating150 psi
-
Nominal Size1/4 in
-
Series3500
-
Domestic/ImportImport
-
End StyleBarb x MIP
- The constant vibration created by air tools, like air drills and pavement breakers, is destructive to air hose couplings, especially the quick-acting type
- To provide protection against coupling breakage and related hazards, Dixon® recommends the use of a whip hose
- To construct a whip hose, connect one end of a short (3 to 10 ft ) air hose to the air tool using a 3500 type steel nipple
- Connect the other end of the hose to the air supply using the standard quick-acting coupling
- The heat treated 3500 nipple will withstand vibration far better than the standard coupling and provide a safer connection
- The whip hose should remain permanently connected to the tool
- For air and water service only
- Do not use in connection with drinking water
- Wash hands after handling
-
UNSPSC40141734
-
Package Description1/BX
-
Standards/ApprovalsASME B1.20.1 304|MSS-SP-114
-
Catalog
-
Full Engineering Drawing
Recently Viewed
HCI Preferred Supplier 973951 Hose Nipple, 1/4 in Nominal, Barb x MIP, ASTM A-351 316 Stainless Steel
HCI Preferred Supplier 973951 Hose Nipple, 1/4 in Nominal, Barb x MIP, ASTM A-351 316 Stainless Steel
RESILIENT TEMPERED STEEL WON’T LOSE SHAPE EVEN AFTER REPEATED USE. HOLDS MULTIPLE KEYS SECURELY
-JWH588229 >
HCI Preferred Supplier 20324 Branch Tee, 1/2 x 1/2 x 3/8 in, Poly-Flo® Flareless x Poly-Flo® Flareless x Male NPTF, CA360 Brass
HCI Preferred Supplier 20324 Branch Tee, 1/2 x 1/2 x 3/8 in, Poly-Flo® Flareless x Poly-Flo® Flareless x Male NPTF, CA360 Brass
9_100x100.jpg)
7/8" SPLIT RINGS-JWH588210>
1500-MM X 3/4" PROWRAP-DAYPWHD121500 >
The Zamac Nailin® is a nail drive anchor which has a body formed from zamac alloy. Drive nails are available in carbon or stainless steel. The anchor can be used in concrete, block, brick or stone. A corrosion-resistant zamac alloy is used to form the anchor body with either a mushroom or flathead. The anchor can be used for light duty, tamperproof applications. The anchor is not recommend for overhead, life safety or sustained tensile loading applications (see performance data section).
