HCI Preferred Supplier 30074 Rigid Adapter, 3/4 x 1 in Nominal, Male Garden Hose x FNPTF End Style, Brass
HCI Preferred Supplier 30074 Rigid Adapter, 3/4 x 1 in Nominal, Male Garden Hose x FNPTF End Style, Brass
-
BrandGeneric
-
Manufacturer Part Number30074
-
CountryUSA
-
Temperature Rating35 to 1000 deg F
-
MaterialBrass
-
Fitting/Connector TypeAdapter
-
Pressure Rating75 psi
-
TypeRigid
-
Nominal Size3/4 x 1 in
-
Hex Size1.37 in
-
Dimensions1.36 in W
-
Domestic/ImportDomestic
-
End StyleMale Garden Hose x FNPTF
-
UNSPSC40141734
-
Standards/ApprovalsPROP65: This product can expose you to chemicals, including lead, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.
-
Catalog
Recently Viewed
HCI Preferred Supplier 30074 Rigid Adapter, 3/4 x 1 in Nominal, Male Garden Hose x FNPTF End Style, Brass
HCI Preferred Supplier 30074 Rigid Adapter, 3/4 x 1 in Nominal, Male Garden Hose x FNPTF End Style, Brass
HYDRAULIC FITTING BW-1212-MP 100895-DAY12NP12BW >
Charlotte CTS 02100 0600 Coupling, 1/2 in Nominal, Socket End Style, CPVC, Domestic
FlowGuard Gold CPVC CTS is for hot and cold water distribution. It is for pressure systems where temperatures will not exceed 180 deg F. It can withstand high pressure for long periods, does not rust or corrode,
HCI Preferred Supplier 32577 Smooth Hose Ferrule, 0.812 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32577 Smooth Hose Ferrule, 0.812 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
John Guest® PSEI012826 Male Connector, Adapter, 3/4 in Nominal, CTS x MNPT End Style, Polysulfone, Domestic
The Speedfit secure range of fittings ensures a secure connection when adapting Speedfit Pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread (refer to tape manufacturers recommendations), working up the full thread length. The fitting can be tightened using a spanner on the hexagon area at the middle of the component. Do not over-tighten the fitting. To lock pipe in place, push the pipe into the fitting and turn the nut clockwise. Should the need arise to release the pipe, turn the locking nut anti-clockwise, push the collet towards the fitting and pull the pipe to release.
30-MM X 2 METRIC DIN FITTING-DAY30DIN12BW>
