HCI Preferred Supplier 18200 Tube-to-Pipe Adapter, 3/4 x 1/2 in, Compression x MNPTF, Brass
HCI Preferred Supplier 18200 Tube-to-Pipe Adapter, 3/4 x 1/2 in, Compression x MNPTF, Brass
-
BrandGeneric
-
Manufacturer Part Number18200
-
CountryUSA
-
Temperature Rating-65 to 250 deg F
-
MaterialBrass
-
Fitting/Connector TypeAdapter
-
Pressure Rating100 psi
-
Nominal Size3/4 x 1/2 in
-
Hex Size1 in
-
End StyleCompression x MNPTF
- Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved
- Fair resistance use long nut when greater vibration resistance is needed
- /-0.02 tolerance on all dimensions
- Not recommended for steel tubing
-
UNSPSC40183109
-
Package Description1/PK
-
Standards/ApprovalsASA|ASME and SAE 060102
-
Catalog
Recently Viewed
HCI Preferred Supplier 18200 Tube-to-Pipe Adapter, 3/4 x 1/2 in, Compression x MNPTF, Brass
HCI Preferred Supplier 18200 Tube-to-Pipe Adapter, 3/4 x 1/2 in, Compression x MNPTF, Brass
12-MJ-12-MB RUN TEE HYDRAULIC ADAPTER-DAY68041212 >
Chem-Tech™ Neoprene over Latex Gloves Yellow Flock Lined Latex Dipped in Blue Neoprene 28 mil Thickness 12 Inch Length Component materials comply with all federal regulations for food contact Chem-Tech™ gloves offer the protection you've come to expect from latex gloves and neoprene gloves rolled into one hard-working glove. This glove features a yellow flock-lined latex glove dipped in rugged blue neoprene for double protection. The 5409S is 28 mils thick and measures 12 inches in length. It has a raised diamond grip pattern on the palm, palm side fingers, and thumb, increasing griping power. Other features include a straight cuff and straight thumb. Are you looking for the best flock-lined gloves? Look no further than MCR Safety! This product contains natural rubber latex which may cause allergic reaction to those with latex allergies.
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
ALFAGOMMA® B-0808-MJIC B Series One-Piece Hose Fitting, 1/2 in Hose, 3/4-16 Connection, Hose x Male End Style, 30.6 mm Cutoff Allowance, Import
HCI Preferred Supplier 10456 90 deg Elbow, 1/2 in Nominal, SAE Male Flare x Male NPTF End Style, CA377 Brass
HCI Preferred Supplier 10456 90 deg Elbow, 1/2 in Nominal, SAE Male Flare x Male NPTF End Style, CA377 Brass
