Dixon 4" ALUMINUM CAM AND GROOVE COUPLER DXN 400-C-AL
HCI Preferred Supplier CGC-400-A1 6193X Cam and Groove Coupler, 4 in Nominal, Hose Shank x Female Coupler End Style, Aluminum
-
BrandGeneric
-
Manufacturer Part NumberCGC-400-A1
-
CountryUSA|Canada
-
UPC628020003254
-
Temperature Rating-40 to 212 deg F
-
MaterialAluminum
-
Fitting/Connector TypeCoupling
-
Pressure Rating150 psi
-
TypePart C
-
Nominal Size4 in
-
Domestic/ImportImport
-
Length6-9/16 in
-
End StyleHose Shank x Female Coupler
-
Series6193X
- Used or worn couplings or extreme temperature conditions will result in reduced operating pressures
- Working temperature ratings are based on new cam and groove couplings at ambient temperatures
- Hose shanks especially designed for easy assembly with TigerflexTM type hoses
- Kuriyama offers two 8 in coupling styles in aluminum
- Aluminum alloy specially designed for high tensile strength and impact resistance
- Supplied with forged brass handles which results in less wear on connecting parts
- Durable stainless steel cam arm pins
- Produced to interchange with all product produced to commercial item description A-A-59326D
- Under no circumstances should cam and groove couplings be used for compressed air or steam service!
- Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70 deg F with a standard seal installed
- Only use the crimp style shanks with the crimp style sleeves and ferrules, due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 58DM75 |
-
UNSPSC40141734
-
Package DescriptionEACH
-
Standards/ApprovalsMIL Specification A-A-59326|ASTM Specified|ASTM Specified|MIL A-A-59326
-
Warranty1 Year
-
Catalog
-
Catalog
Recently Viewed
HCI Preferred Supplier CGC-400-A1 6193X Cam and Groove Coupler, 4 in Nominal, Hose Shank x Female Coupler End Style, Aluminum
HCI Preferred Supplier CGA-500-A1 6191X Cam and Groove Adapter, 5 in Nominal, Male Adapter x FNPT End Style, Aluminum
HCI Preferred Supplier CGA-500-A1 6191X Cam and Groove Adapter, 5 in Nominal, Male Adapter x FNPT End Style, Aluminum
1/2" CPVC PIPE STRAP--25 PER BAG-JWH434471 >
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
HCI Preferred Supplier 32126 Hose Tee, 3/8 in Nominal, Barb End Style, Brass
HCI Preferred Supplier 20661N 90 deg Union Elbow, 8 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20661N 90 deg Union Elbow, 8 mm Nominal, Push-In End Style, Brass
