Dixon® PPB50 Type B Cam and Groove Coupler, 3/4 x 1/2 in Nominal, Female Coupler x MNPT End Style, Polypropylene
Dixon® PPB50 Type B Cam and Groove Coupler, 3/4 x 1/2 in Nominal, Female Coupler x MNPT End Style, Polypropylene
-
BrandDixon®
-
Manufacturer Part NumberPPB50
-
CountryUSA
-
MaterialPolypropylene
-
Fitting/Connector TypeCoupling
-
Pressure Rating125 psi
-
TypeType B
-
Nominal Size3/4 x 1/2 in
-
End StyleFemale Coupler x MNPT
- Manufactured from a glass-filled polypropylene
- Supplied with EPDM gaskets, 304 stainless steel handles and pins
- Polypropylene cam and groove should not be mixed with metal fittings
- 1/2 in couplers and adapters will interchange with 3/4 in couplers and adapters, only the threads and barbs are 1/2 in
- EPDM seal
- Pressure rating recommendations are based on the use of mating Dixon® fittings at ambient temperature 70 deg F with a standard seal installed
- Not recommended for use with PTFE gaskets
- 125 psi at ambient temperature 70 deg F pressure
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
-
UNSPSC40141734
-
Package Description24/BX
-
WarrantyLimited
-
Catalog
Recently Viewed
Dixon® PPB50 Type B Cam and Groove Coupler, 3/4 x 1/2 in Nominal, Female Coupler x MNPT End Style, Polypropylene
Dixon® PPB50 Type B Cam and Groove Coupler, 3/4 x 1/2 in Nominal, Female Coupler x MNPT End Style, Polypropylene
3/4" X 1/4" GALVANIZED REDUCER-JPW3/4X1/4GR >
HCI Preferred Supplier 2404128 Straight Connector, 1/2 in x 1-1/16-12 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
HCI Preferred Supplier 2404128 Straight Connector, 1/2 in x 1-1/16-12 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
COX™ 41004 Chilton 1-Cartridge Caulk Gun, 10.3 oz Container, Orange
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
This is a CxC (Cup x Cup) coupling with rolled stop designed for use in commercial and residential systems. It is mainly utilized as an above the ground fitting to join and solder water supply piping. This straight coupling is built of copper with sweat sockets on both ends to create a union between 1/2 in. ID (5/8 in. OD) straight lends of a pipe. This copper fitting meets NSF standards and complies with Lead-Free law for safe water drinking.
