Dixon® PPE50 Type E Cam and Groove Adapter, 3/4 x 1/2 in, Male Adapter x Hose Shank, Polypropylene
Dixon® PPE50 Type E Cam and Groove Adapter, 3/4 x 1/2 in, Male Adapter x Hose Shank, Polypropylene
-
BrandDixon®
-
Manufacturer Part NumberPPE50
-
CountryUSA
-
MaterialPolypropylene
-
Fitting/Connector TypeAdapter
-
Pressure Rating125 psi
-
TypeType E
-
Nominal Size3/4 x 1/2 in
-
Dimensions17/32 in Dia
-
Length2-5/16 in
-
End StyleMale Adapter x Hose Shank
- Manufactured from a glass-filled polypropylene
- 1/2 in couplers and adapters will interchange with 3/4 in couplers and adapters, only the threads and barbs are 1/2 in
- Polypropylene cam and groove should not be mixed with metal fittings
- Under no circumstances should cam and groove couplings be used for compressed air or steam service!
- Pressure rating is based on the seal of the mating part
- Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70 deg F with a standard seal installed
- Not recommended for use with PTFE gaskets
- 125 psi at ambient temperature 70 deg F pressure
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
-
UNSPSC40141734
-
Package Description10/BX
-
WarrantyLimited
-
Catalog
Recently Viewed
Dixon® PPE50 Type E Cam and Groove Adapter, 3/4 x 1/2 in, Male Adapter x Hose Shank, Polypropylene
Dixon® PPE50 Type E Cam and Groove Adapter, 3/4 x 1/2 in, Male Adapter x Hose Shank, Polypropylene
Coilhose® RB-KIT REDI-BURST™ Pocket Blow Gun Kit, 150 psi Working, 1/4 in NPT x 1/8 in NPT Thread, Die Cast Zinc, Import
The REDI-BURST™ pocket blow gun delivers the same performance as larger thumb lever blow guns, but is much smaller. The REDI-BURST™ pocket blow gun requires less storage space in a tool box and is portable enough to keep in a pocket or on a tool belt. The REDI-BURST™ kit (RB-KIT) comes with a standard safety tip and a rubber tip.
HCI Preferred Supplier 18201 Tube-to-Pipe Adapter, 3/4 in, Compression x MNPTF, Brass
HCI Preferred Supplier 18201 Tube-to-Pipe Adapter, 3/4 in, Compression x MNPTF, Brass
Alkyd High Heat Coatings offer three levels of heat protection and will withstand continuous exposure to the temperatures in their posted range. General Purpose is designed for surfaces exposed to temperatures up to 400 deg F. Heavy Duty is designed for surfaces exposed to temperatures up to 800 deg F. High-Performance offers the highest level of heat protection for surfaces exposed to temperatures up to 1200 deg F. These products are self-priming can be applied directly to metal and prepared previously coated surfaces.
