Dixon® 100-E-AL Boss-Lock™ Type E Cam and Groove Adapter, 1 in, Male Adapter x Hose Shank, Aluminum
Dixon® 100-E-AL Boss-Lock™ Type E Cam and Groove Adapter, 1 in, Male Adapter x Hose Shank, Aluminum
-
BrandDixon®
-
Manufacturer Part Number100-E-AL
-
CountryUSA
-
MaterialAluminum
-
Fitting/Connector TypeAdapter
-
Pressure Rating250 psi
-
TypeType E
-
Nominal Size1 in
-
SeriesBoss-Lock™
-
Dimensions1-7/16 in Dia
-
Length4-5/8 in
-
End StyleMale Adapter x Hose Shank
- Precision machined to rigid tolerances
- Pressure rating is based on the seal of the mating part
- Produced to interchange with all product produced to commercial item description A-A-59326D
- Under no circumstances should cam and groove couplings be used for compressed air or steam service!
- Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70 deg F with a standard seal installed
- Only use the crimp style shanks with the crimp style sleeves and ferrules, due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products
- 250 psi at ambient temperature 70 deg F pressure
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 58CR04 |
| Grainger | 58CR04 |
-
UNSPSC40141734
-
Package Description25/BX
-
Catalog
Recently Viewed
Dixon® 100-E-AL Boss-Lock™ Type E Cam and Groove Adapter, 1 in, Male Adapter x Hose Shank, Aluminum
Dixon® 100-E-AL Boss-Lock™ Type E Cam and Groove Adapter, 1 in, Male Adapter x Hose Shank, Aluminum
Dixon® 16AMP-G800 Solid End Cap, 8 in, Clamp, 304 Stainless Steel, Domestic
Dixon® 16AMP-G800 Solid End Cap, 8 in, Clamp, 304 Stainless Steel, Domestic
HCI Preferred Supplier 20130 Branch Tee, 1/4 x 1/4 x 1/8 in Nominal, Push-In x Push-In x FNPTF End Style, Brass
HCI Preferred Supplier 20130 Branch Tee, 1/4 x 1/4 x 1/8 in Nominal, Push-In x Push-In x FNPTF End Style, Brass
Dixon® PPA150 Type A Cam and Groove Adapter, 1-1/2 in, Male Adapter x FNPT, Polypropylene
Dixon® PPA150 Type A Cam and Groove Adapter, 1-1/2 in, Male Adapter x FNPT, Polypropylene
HCI Preferred Supplier 200-D-PAL Cam and Groove Fitting, 2 in Nominal, Female Adapter x Dust Plug End Style, Aluminum
HCI Preferred Supplier 61985 Cam and Groove Fitting, 2 in Nominal, Female Adapter x Dust Plug End Style, Aluminum
Sharkbite® U280 Pipe Elbow, 1/2 in Nominal, Push-Fit x MNPT End Style, Brass, Domestic
SharkBite® U280 Elbow 1/2 in MNPT x 1/2 in. The Elbow allows you to easily add another line off of existing plumbing. It can be used to connect to CPVC, copper or PEX tubing. Simply cut the pipe and push on the fitting. SharkBite® fittings can easily be removed and are reusable.
