HCI Preferred Supplier 20036P Connector, 3/8 x 1/4 in Nominal, Push-In x FNPTF, Plastic
HCI Preferred Supplier 20036P Connector, 3/8 x 1/4 in Nominal, Push-In x FNPTF, Plastic
-
BrandGeneric
-
Manufacturer Part Number20036P
-
CountryUSA
-
Temperature Rating33 to 140 deg F
-
MaterialPlastic
-
Fitting/Connector TypeConnector
-
Pressure Rating0 to 150 psi
-
Nominal Size3/8 x 1/4 in
-
End StylePush-In x FNPTF
- For plastic tube polyethylene, nylon, polyurethane (for soft tubing or thin wall tube, tube supports are recommended)
- For braided tube, the use of tube to hose stems and elbows is required, to retain braided tube on barbs, the use of clamps is also recommended
- Food grade polypropylene bodies, food grade nitrile rubber or EPDM O-rings, food grade acetal copolymer, stainless steel teeth collet
- Suitable for vacuum
-
UNSPSC40183110
-
Package Description1/PK
-
Standards/ApprovalsNSF|FDA Approved
-
Catalog
-
Full Engineering Drawing
Recently Viewed
HCI Preferred Supplier 20036P Connector, 3/8 x 1/4 in Nominal, Push-In x FNPTF, Plastic
HCI Preferred Supplier 20036P Connector, 3/8 x 1/4 in Nominal, Push-In x FNPTF, Plastic
HCI Preferred Supplier 98824 Industrial Interchange Coupler, 3/8 in Nominal, MNPT, Steel
HCI Preferred Supplier 98824 Industrial Interchange Coupler, 3/8 in Nominal, MNPT, Steel
CYL-SC-104 Dodge® 124251 207 Series Non-Expansion Normal Duty Cylindrical Ball Bearing Cartridge Unit, 1-1/4 in Dia Bore, 3-7/8 in OD, 1.71 in W, Steel Bearing
A setscrew shaft attachment method is the most common means of securing a mounted ball bearing to a shaft and also the easiest to install. The Dodge® mounted ball bearing offering is engineered with a 65 deg setscrew angle. This ensures the maximum grip onto the shaft, especially when using premium cup point set screws with the high quality manufacturing of the Dodge® insert.
HCI Preferred Supplier 98825 Industrial Interchange Coupler, 1/2 in Nominal, MNPT, Steel
HCI Preferred Supplier 98825 Industrial Interchange Coupler, 1/2 in Nominal, MNPT, Steel
HCI Preferred Supplier 99830 Industrial Interchange Hose ID Plug, 1/2 in Nominal, Tube, Steel
HCI Preferred Supplier 99830 Industrial Interchange Hose ID Plug, 1/2 in Nominal, Tube, Steel
Starrett® 95419-100 Band Saw Blade Coil Stock, 3/4 in W x 0.032 in THK, 100 ft L Coil, Carbide Tooth
100 Ft. Coil, Advanz™ CG Carbide Grit Band Saw Blade Material - 3/4" width, .032" thickness, Continuous edge, Carbide Medium Grit. Made with a tungsten carbide grit bonded to an alloy back. Cuts through many hard or abrasive materials that conventional tooth blades won't cut.
