Dixon® DM16 Hose Mender, 1-1/4 in, Hose Shank, Steel, Domestic
Dixon® DM16 Hose Mender, 1-1/4 in, Hose Shank, Steel, Domestic
-
BrandDixon®
-
UPC089109724000
-
Manufacturer Part NumberDM16
-
CountryUSA
-
FinishZinc Plated
-
MaterialSteel
-
Fitting/Connector TypeCoupling
-
Nominal Size1-1/4 in
-
Dimensions1-9/32 in Dia
-
Domestic/ImportDomestic
-
Length4-1/32 in
-
End StyleHose Shank
- Hose mender for repairing hoses
- Connects to a hose on both ends
- Zinc plated steel for greater corrosion resistance than unplated steel
- Barbed fitting for a tight seal on hoses
- Not for compressible products such as air, nitrogen, or steam
- For use with a hose clamps or crimp sleeve or ferrule
- Menders are not for compressible products such as air, nitrogen or steam
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
-
UNSPSC40141734
-
Package Description50/BX
-
WarrantyLimited
-
Catalog
Recently Viewed
Dixon® DM16 Hose Mender, 1-1/4 in, Hose Shank, Steel, Domestic
Dixon® 200-C-SS Type-C Cam and Groove Coupler, 2 in Nominal, Female Coupler x Hose Shank End Style, 316 Stainless Steel, Domestic
Dixon® 200-C-SS Type-C Cam and Groove Coupler, 2 in Nominal, Female Coupler x Hose Shank End Style, 316 Stainless Steel, Domestic
HCI Preferred Supplier 32015 Rigid Adapter, 1/2 x 1/4 in Nominal, Hose Barb x MNPTF End Style, Brass
HCI Preferred Supplier 32015 Rigid Adapter, 1/2 x 1/4 in Nominal, Hose Barb x MNPTF End Style, Brass
HCI Preferred Supplier 10270 Adapter, 1/2 x 3/4 in Nominal, SAE Male Flare x Male NPTF, Brass
HCI Preferred Supplier 10270 Adapter, 1/2 x 3/4 in Nominal, SAE Male Flare x Male NPTF, Brass
HCI Preferred Supplier 10262 Adapter, 3/8 x 1/8 in Nominal, SAE Male Flare x Male NPTF, Brass
HCI Preferred Supplier 10262 Adapter, 3/8 x 1/8 in Nominal, SAE Male Flare x Male NPTF, Brass
HCI Preferred Supplier 32055 Rigid Hose-to-Pipe Adapter, 5/16 x 1/8 in Nominal, Barb x FNPTF End Style, Brass
HCI Preferred Supplier 32055 Rigid Hose-to-Pipe Adapter, 5/16 x 1/8 in Nominal, Barb x FNPTF End Style, Brass
