Results 1 - 24 of 205
Grid

5/16 in brass hose mender fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Both ends have hose barbs.

HCI Preferred Supplier 38868 Hose-to-Pipe Elbow, 3/8 x 1/4 in Nominal, Barb x MIP End Style, Brass

HCI Preferred Supplier 38864 Hose-to-Pipe Elbow, 5/16 x 1/4 in Nominal, Barb x MIP End Style, Brass

HCI Preferred Supplier 38860 Hose-to-Pipe Elbow, 1/4 x 1/8 in Nominal, Barb x MIP End Style, Brass

HCI Preferred Supplier 38808 Beaded Hose-to-Pipe Connector, 5/16 x 1/4 in Nominal, Barb x MIP End Style, Brass

HCI Preferred Supplier 33438B Barb Tee, 1 in Nominal, Hose Barb End Style, Polyethylene

HCI Preferred Supplier 33437B Barb Tee, 3/4 in Nominal, Hose Barb End Style, Polyethylene

HCI Preferred Supplier 33433B Hose Tee, 1/2 in Nominal, Barb End Style, Polyethylene Coated

HCI Preferred Supplier 33422B Hose Tee, 1/4 in Nominal, Barb End Style, Polyethylene Coated

HCI Preferred Supplier 33415B Hose Tee, 1/8 in Nominal, Barb End Style, Polyethylene Coated

HCI Preferred Supplier 33410B Reducing Splicer, 5/8 x 1/2 in Nominal, Barb End Style, Polyethylene Coated

HCI Preferred Supplier 33408B Reducing Splicer, 1/2 x 3/8 in Nominal, Barb End Style, Polyethylene Coated

HCI Preferred Supplier 33407B Reducing Splicer, 1/2 x 1/4 in Nominal, Barb End Style, Polyethylene Coated

HCI Preferred Supplier 33406B Reducing Splicer, 3/8 x 1/4 in Nominal, Barb End Style, Polyethylene Coated

HCI Preferred Supplier 33091B Hose Splicer, 1/8 in Nominal, Barb End Style, Polyethylene Coated

HCI Preferred Supplier 33033W Hose-to-Pipe Adapter, 1-1/2 in Nominal, Barb x MIP End Style, Nylon

HCI Preferred Supplier 33025B Hose-to-Pipe Adapter, 1 in Nominal, Barb x MIP End Style, Polyethylene Coated

HCI Preferred Supplier 33023B Hose-to-Pipe Adapter, 3/4 in Nominal, Barb x MIP End Style, Polyethylene Coated

HCI Preferred Supplier 33013B Hose-to-Pipe Adapter, 3/8 in Nominal, Barb x MIP End Style, Polyethylene Coated

HCI Preferred Supplier 33005B Hose-to-Pipe Adapter, 1/4 in Nominal, Barb x MIP End Style, Polyethylene Coated

HCI Preferred Supplier 32915 Rigid Straight Adapter, 3/4 x 1/4 in Nominal, Hose Barb x MNPTF End Style, Brass

HCI Preferred Supplier 32400 Hose Tee, 1/2 in Nominal, Barb End Style, Brass

HCI Preferred Supplier 32391 Hose-to-Pipe Elbow, 3/16 x 1/4 in Nominal, Barb x MNPTF End Style, CA377 Brass

HCI Preferred Supplier 32390 Rigid Adapter, 5/16 x 1/2 in Nominal, Hose Barb x MNPTF End Style, Brass

Page 1 of 9

Recently Viewed

Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.

Dodge® Torque-Arm™ (SCXT) is a helical gear reducer for screw conveyor applications. This unit mounts directly to the trough end of the screw, using the optional adapter and drive shaft. It offers a number of accessories available for the toughest application.

New
My Wishlist
Compare

MORSE C/Tool .6260" HSS CHUCKING REAMERS MCT 29853

Chucking Reamers
$95.34

MORSE® 29853 1655H Chucking Reamer, 0.626 in Dia x 9 in OAL, 0.5615 in Dia Straight Shank, Straight Flute

Weiler® 10 in medium face crimped wire wheel provide a flexible brushing action and consistent performance for demanding light duty cleaning and deburring applications on steel, armored steel, cast iron, ductile iron and tool steel parts. Featuring Weiler® solid ring construction, these radial brushes are available in heat treated steel, type 302 stainless steel and brass wire. 2 in arbor hole for use on CNC/milling/automatic machine, bench and pedestal grinders.

The all new advanced bi-metal hole saw by M.K. Morse®. Our latest sawing innovation replaces all current Morse bi-metal hole saw solutions into one, simple optimized powerhouse. Arbor required.

Weiler® 07771 Threaded Arbor Adapter, M10 x 1.25 Dia Inside x 5/8-11 Dia Outside

If you need any additional information, prices, availability, etc. please contact us at 1-800-290-9908 or e-mail us at

Footer Menu