NIBCO® Press System® 9043200PC PC606 Elbow, 1-1/2 in Nominal, Press End Style, Wrot Copper, Domestic
The NIBCO® Press System® copper 45-degree elbow features an inboard bead and EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds with no flame, solder or flux. The elbow has press connections. The fitting provides a method of changing the pipeline direction by 45 degrees.
-
BrandNIBCO®
-
UPC039923307798
-
Manufacturer Part Number9043200PC
-
CountryUSA
-
Temperature Rating-20 to 250 deg F
-
MaterialWrot Copper
-
Fitting/Connector Type45 deg Elbow
-
Pressure Rating200 psi
-
TypeSmall Diameter
-
Nominal Size1-1/2 in
-
SeriesPC606
-
Domestic/ImportDomestic
-
End StylePress
- Select configurations to 300 psi cwp
- Dezincification resistant
- EPDM O-ring
- Silicone lubrication
- Hot water up to 250 deg F, chilled water down to 33 deg F
- Approved for underground installation (per local installation code)
- Use with hard/soft ASTM B88 K, L and M copper tube
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | NPC606LDJ |
-
UNSPSC40183101
-
Package Description1/BX
-
Standards/ApprovalsASME B16/51|ASTM B75 Alloy C12200 Copper|CSA MSE 13/PS-117|UPC Listed
-
WarrantyLimited
-
SDS
-
Warranty Information
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
NIBCO® Press System® 9043200PC PC606 Elbow, 1-1/2 in Nominal, Press End Style, Wrot Copper, Domestic
The NIBCO® Press System® copper 45-degree elbow features an inboard bead and EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds with no flame, solder or flux. The elbow has press connections. The fitting provides a method of changing the pipeline direction by 45 degrees.
JET® JT9-578100 LED Lamp, For Use With 578100 IBG-8 in, 10 in and 12 in Grinders, 20 in L
Shed more light on your grinding operation! Flex-neck LED lamp provides inexpensive bright light with low heat output. Trust genuine JET replacement parts when it's time to exchange a component.
Browning® Classical Gripbelt® 1026228 AK Series Type 2 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 3-1/4 in OD, 3.2 in (A)/2.66 in (3L) Dia Pitch, 21/32 in W Face
Browning® Classical Gripbelt® 1025808 AK Series Type 1 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 1-3/4 in OD, 1.7 in (A)/1.16 in (3L) Dia Pitch, 21/32 in W Face
Many accessories accompany the Browning® shaft mount reducer. These accessories are designed to provide installation flexibility, improved performance and safety.
HCI Preferred Supplier 28110L Light Pattern Hex Bushing, 3/4 x 3/8 in Nominal, MNPT x FNPT End Style, Brass
HCI Preferred Supplier 28110L Light Pattern Hex Bushing, 3/4 x 3/8 in Nominal, MNPT x FNPT End Style, Brass
