HCI Preferred Supplier 20055C Connector, 1/4 in Nominal, Push-In x MNPT, 0 to 150 psi Pressure, Brass/Composite Polyacetal
HCI Preferred Supplier 20055C Connector, 1/4 in Nominal, Push-In x MNPT, 0 to 150 psi Pressure, Brass/Composite Polyacetal
-
BrandGeneric
-
Manufacturer Part Number20055C
-
CountryUSA
-
Temperature Rating-104 to 180 deg F
-
FinishNickel Plated
-
MaterialBrass/Composite Polyacetal
-
Pressure Rating0 to 150 psi
-
Nominal Size1/4 in
-
Domestic/ImportImport
-
End StylePush-In x MNPT
- The latest generation of composite material is used in the body construction in addition to brass on threaded components and stainless steel on the gripper
- +/- 0.02 tolerance on all dimensions
- Air fluid admitted
- 340 psi minimum burst pressure
- Composite polyacetal (Hemopolymer, Copolymer) and brass body, stainless steel gripper ring
- Vacuum of 28 in Hg (99% vacuum) capability
- Nickel plated brass threads
- Silicone free
- Polypropylene release button
- Buna-N D seal
- Black body is glass-filled nylon
- Maximum circuit pressure depends equally on the type and diameter of the tube used
- Pressure rating given at ambient temperature 70 deg F
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 58CV53 |
-
UNSPSC40183110
-
Package Description1/PK
-
Standards/ApprovalsPROP65: These warnings inform Californians about their exposures to chemicals that cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
-
Catalog
Recently Viewed
HCI Preferred Supplier 20055C Connector, 1/4 in Nominal, Push-In x MNPT, 0 to 150 psi Pressure, Brass/Composite Polyacetal
HCI Preferred Supplier 20055C Connector, 1/4 in Nominal, Push-In x MNPT, 0 to 150 psi Pressure, Brass/Composite Polyacetal
DeWALT® 5508 SPIKE® Tamperproof Pre-Expanded Pin Anchor, 3/16 in Dia, 2-1/2 in OAL, Carbon Steel Body Shell, Carbon Steel Pin, Mushroom Head Head
The SPIKE® anchor is a patented, 1-piece, tamper proof vibration-resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The SPIKE® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
Dixon® PPA50 Type A Cam and Groove Adapter, 3/4 x 1/2 in, Male Adapter x FNPT, Polypropylene
Dixon® PPA50 Type A Cam and Groove Adapter, 3/4 x 1/2 in, Male Adapter x FNPT, Polypropylene
10 TOOTHINE D-GRIP ENSILAGE FORK-JWH750217 >
HCI Preferred Supplier 18104 Tube Tee, 5/16 in, Compression, CA377 Brass
