Pneumatic Mufflers & Vents
HCI Preferred Supplier 300024 Muffler, 1/2 in, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300024 Muffler, 1/2 in, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300023 Muffler, 3/8 in, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300023 Muffler, 3/8 in, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300022 Muffler, 1/4 in, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300022 Muffler, 1/4 in, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300021 Muffler, 1/8 in, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300021 Muffler, 1/8 in, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300008 Breather Vent, 1 in, 40 micron Filter, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300008 Breather Vent, 1 in, 40 micron Filter, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300006 Breather Vent, 3/4 in, 40 micron Filter, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300006 Breather Vent, 3/4 in, 40 micron Filter, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300004 Breather Vent, 1/2 in, 40 micron Filter, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300004 Breather Vent, 1/2 in, 40 micron Filter, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300003 Breather Vent, 3/8 in, 40 micron Filter, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300003 Breather Vent, 3/8 in, 40 micron Filter, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300002 Breather Vent, 1/4 in, 40 micron Filter, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300002 Breather Vent, 1/4 in, 40 micron Filter, Brass Body/Sintered Bronze Element
CMF88 by Coilhose | Conical Muffler | 1" Male NPT Thread | 2-7/8" Length | 1-3/8" Hex | Nickel-Plated Brass
Recently Viewed
DodgeĀ® 125116 210 Non-Expansion Normal Duty Single Lip Wide Slot Take-Up Set Screw Ball Bearing, 1-15/16 in Dia Bore, 5.82 in L x 1.94 in W x 4-3/4 in H, 7891 lb Dynamic/4906 lb Static Load
For over 70 years, DodgeĀ® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new DodgeĀ® design. The result is the DodgeĀ® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
BBI 588637 Fully Threaded Machine Screw, 1/4-20, 1-1/4 in OAL, Round Head, Zinc CR+3 Plated, PhillipsĀ® Drive
BBI 588637 Fully Threaded Machine Screw, 1/4-20, 1-1/4 in OAL, Round Head, Zinc CR+3 Plated, PhillipsĀ® Drive
BBI 241376 Dowel Pin, 5/8 in Dia x 2 in L, Alloy Steel, Plain
14 AWG min. Conductor Size; 1/0 AWG Max. Conductor Size; Copper/Aluminum Conductor Material; UL 486A/B, UL 453G, CSA Approval; 600 Volt Voltage Rating; High Dielectric Strength Plastisol Insulated Body Material; 2 Port(S); 1-Side Entry Cable Entry
GreenleeĀ® Slug-BusterĀ® 7238SB Manual Knockout Punch Die Kit, 10 ga Capacity, For Use With Battery Powered/Hydraulic Ratchet Driver and 3/8 in and 3/4 in Draw Stud, 1/2 to 2 in Conduit/Pipe, Mild Steel
GreenleeĀ® Slug-BusterĀ® 7238SB Manual Knockout Punch Die Kit, 10 ga Capacity, For Use With Battery Powered/Hydraulic Ratchet Driver and 3/8 in and 3/4 in Draw Stud, 1/2 to 2 in Conduit/Pipe, Mild Steel
Cylindrical Roller Bearing ā āNJā CONFIGURATION Cylindrical Roller Bearings utilize a modified cylindrical roller that provides line contact with the inner and outer ring raceways. They are suitable for high speeds and have a high radial load capacity. The rollers are guided by ribs on either the inner or outer rings. Depending upon the configuration, the bearings may or may not be able to accept any axial loading. The inner and outer rings are separable which may aid in assembly/disassembly of components. The āNJā Type bearings has shoulders on both sides of the outer ring and one shoulder on the inner ring. This allows the bearing to accept light axial loads in one direction. Some sizes may be available in a high capacity design (EG) that has larger diameter rollers and a polyamine cage. Stamped steel or machined brass (MY) cages are generally used. These bearings are most commonly used in gearboxes, rolling mills, crushers and pulverizers.
