Dixon® 13MHHM800 1-Pin Heavy Duty Clamp With Wing Nut, 8 in Tube, 304 Stainless Steel, Domestic
Dixon® 13MHHM800 1-Pin Heavy Duty Clamp With Wing Nut, 8 in Tube, 304 Stainless Steel, Domestic
-
BrandDixon®
-
Manufacturer Part Number13MHHM800
-
CountryUSA
-
Material304 Stainless Steel
-
Type1-Pin Heavy Duty
-
Domestic/ImportDomestic
- Wing nut tightened to 25 in-lb of torque
- 100 psi at 70 deg F and 50 psi at 250 deg F pressure
- Service pressure ratings are based on the following parameters: matching elastomer gasket and weld ferrules properly aligned and assembled with the clamps tightened to required torques, tests are done hydrostatically with no water hammer or shock loads
- Please note the pressure ratings of the described unions may be above the recommended pipe line operating pressures
-
UNSPSC31162900
-
Package Description10/BX
-
WarrantyLimited
-
Catalog
Recently Viewed
Dixon® 13MHHM800 1-Pin Heavy Duty Clamp With Wing Nut, 8 in Tube, 304 Stainless Steel, Domestic
Dixon® 13MHHM800 1-Pin Heavy Duty Clamp With Wing Nut, 8 in Tube, 304 Stainless Steel, Domestic
HCI Preferred Supplier 38108 90 deg Tube-to-Pipe Elbow, 3/4 x 1/2 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
HCI Preferred Supplier 38108 90 deg Tube-to-Pipe Elbow, 3/4 x 1/2 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
HCI Preferred Supplier 38107 90 deg Tube-to-Pipe Elbow, 5/8 x 1/2 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
HCI Preferred Supplier 38107 90 deg Tube-to-Pipe Elbow, 5/8 x 1/2 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
HCI Preferred Supplier 38091 90 deg Tube-to-Pipe Elbow, 1/4 x 1/8 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
HCI Preferred Supplier 38091 90 deg Tube-to-Pipe Elbow, 1/4 x 1/8 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
HCI Preferred Supplier 32521 Smooth Hose Ferrule, 0.525 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32521 Smooth Hose Ferrule, 0.525 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
Milton® (#690BK) 1/4 in FNPT dual head air Chuck Milton®'s S-690 dual head air Chuck allows easy access to inner dual when valve is facing inward. Sealing type Chuck is closed and is for use on an airline. Designed and manufactured to exacting standards, Milton® air Chucks have a maximum pressure of 150 psi. This air Chuck is not intended for use or compatible on all Milton® inflator gauges.
