NIBCO 1"-MPT X 2" SCH-80 PVC NIPPLES NIB 210-020
Connection Type: Male Threaded x Male Threaded (TBE - Threaded Both Ends).Material Class: Schedule 80 PVC, built for higher-pressure commercial and irrigation systems. Dimensions: 1-inch nominal diameter by 2 inches in length.
-
BrandLasco®
-
UPC025528710804
-
Manufacturer Part Number210-020
-
CountryUSA
-
Temperature Rating33 to 140 deg F
-
MaterialPVC
-
Pressure Rating630 psi
-
Method of ManufactureMolded
-
Schedule RatingSCH 80/XH
-
Nominal Size1 in
-
Domestic/ImportDomestic
-
Length2 in
-
End StyleMNPT
- ASTM D-1785 - poly (Vinyl Chloride) (PVC) plastic pipe
- Machined from PVC SCH 80 pipe
- Do not use LASCO fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by LASCO
- Fitting modification voids the warranty
-
UNSPSC40173304
-
Package Description50/CTN
-
Standards/ApprovalsASTM D1785|ASTM F441/441M
-
Specification Sheet
-
Catalog
Recently Viewed
Connection Type: Male Threaded x Male Threaded (TBE - Threaded Both Ends).Material Class: Schedule 80 PVC, built for higher-pressure commercial and irrigation systems. Dimensions: 1-inch nominal diameter by 2 inches in length.
Smith Bearing® CR-1-5/8-X Cylindrical Stud Type Needle Bearing Cam Follower, 1-5/8 in Dia x 7/8 in W Roller, 5/8 in Dia x 1-1/2 in L Stud, 52100 Steel Roller
Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.
Rust-Oleum High Performance V2100 System Rust Preventive Enamel Spray Paint features an advanced, fast-drying formula that provides excellent protection from rust and corrosion. This industrial application enamel is equipped with a high-output spray tip for faster project completion. Ideal for use on structural steel, equipment, machinery, storage tanks, handrails and more.
14902" READY MOP CLEANER-JWH618932 >
Dodge® Tigear-2® 26Q40L14 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Solid A Shaft Output, 1.55 hp, 40:1 Gear, 44 rpm Maximum Output, 1685 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
