NIBCO® 205-050 Pipe Nipple, 1/2 in x 5 in L MNPT, PVC, SCH 80/XH, Molded, Domestic
Threaded pipe nipple Material: Gray Schedule 80 PVC (High strength, heavy wall).
-
BrandLasco®
-
UPC025528710491
-
Manufacturer Part Number205-050
-
CountryUSA
-
Temperature Rating33 to 140 deg F
-
MaterialPVC
-
Pressure Rating850 psi
-
Method of ManufactureMolded
-
Schedule RatingSCH 80/XH
-
Nominal Size1/2 in
-
Domestic/ImportDomestic
-
Length5 in
-
End StyleMNPT
- ASTM D-1785 - poly (Vinyl Chloride) (PVC) plastic pipe
- Machined from PVC SCH 80 pipe
- NSF/ANSI standard 14 and 61 (does not apply to *Molded Nipples)
- Do not use LASCO fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by LASCO
- Fitting modification voids the warranty
-
UNSPSC40173304
-
Package Description50/CTN
-
Standards/ApprovalsASTM D1785|ASTM F441/441M|ANSI/NSF Standard 14/61
-
Specification Sheet
-
Catalog
Recently Viewed
NIBCO® 205-050 Pipe Nipple, 1/2 in x 5 in L MNPT, PVC, SCH 80/XH, Molded, Domestic
Threaded pipe nipple Material: Gray Schedule 80 PVC (High strength, heavy wall).
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
7" X 7/8" 60-GRIT GRIND/WHEELS-SAI57760 >
Gates® Power Transmission Hi-Power® II PowerBand® 4/C180 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 184 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
.875" X 1.575" X .250" RADIAL SHAFT SINGLE LIP, SOLID OIL SEAL. NITRILE RUBBER MATERIAL, CRW1 DESIGN
