Lasco® 9207-060 Nipple, 3/4 in x 6 in L Thread, CPVC, SCH 80/XH, Domestic
Lasco® 9207-060 Nipple, 3/4 in x 6 in L Thread, CPVC, SCH 80/XH, Domestic
-
BrandLasco®
-
UPC025528762346
-
Manufacturer Part Number9207-060
-
CountryUSA
-
MaterialCPVC
-
Schedule RatingSCH 80/XH
-
Nominal Size3/4 in
-
Domestic/ImportDomestic
-
Length6 in
-
End StyleThread
- ASTM F-441/F-441M - Chlorinated poly (Vinyl Chloride) (CPVC) plastic pipe Schedule 80
- Machined from PVC SCH 80 Pipe (Molded Nipples)
- Do not use Lasco fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco
- Fitting modification voids the warranty
- Code: 04/B4
-
UNSPSC40173305
-
Package Description50/CT
-
Standards/ApprovalsASTM F441/F441M|ANSI/NSF Standard 14 and 61
-
Catalog
-
Specification Sheet
Recently Viewed
Lasco® 9207-060 Nipple, 3/4 in x 6 in L Thread, CPVC, SCH 80/XH, Domestic
Lasco® 9207-060 Nipple, 3/4 in x 6 in L Thread, CPVC, SCH 80/XH, Domestic
Dodge® 3004 Female Flange, 1/2 to 2-11/16 in Dia Bore, 7 in OD, 3-3/4 in OAL, 18400 in-lb Torque, 3545 rpm Max
Dodge® 3004 Female Flange, 1/2 to 2-11/16 in Dia Bore, 7 in OD, 3-3/4 in OAL, 18400 in-lb Torque, 3545 rpm Max
MEED-840X62.68 Poly Slings-lifmeed840x62.
POLY SLINGS-LIFMEED840X62.68>
Morse® 465703 TL Series Torque Limiter, 3/4 in Straight Bore, 2-1/2 in OD, 5 to 20 in-lb Torque
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
03434 SAIT/UNITED ABRASIVE PRODUCTS 4" x .014" x M10-1.25 Stainless Steel Knot Wire Wheel Brush.
Diameter: 4 inches.Wire Diameter: .014 inches.Thread Size: M10 x 1.25.Material: Stainless Steel.Type: Knot Wheel (KNOT WH)
HEATER FILTER KIT - DYGSPKFA1005 >
