HCI Preferred Supplier 40007 Standard Pipe Nipple, 1/8 in Nominal, 4 in L, Brass, NPT End Style
HCI Preferred Supplier 40007 Standard Pipe Nipple, 1/8 in Nominal, 4 in L, Brass, NPT End Style
-
BrandGeneric
-
Manufacturer Part Number40007
-
CountryUSA
-
Temperature Rating100 to 400 deg F
-
MaterialBrass
-
Pressure Rating370 psi at 100 deg F/370 psi at 200 deg F/320 psi at 300 deg F/140 psi at 400 deg F
-
Method of ManufactureSeamless
-
ColorRed
-
TypeStandard
-
Nominal Size1/8 in
-
Dimensions0.281 in ID x 0.405 in OD x 0.062 in THK
-
Domestic/ImportImport
-
Length4 in
-
End StyleNPT
- Meets legislation for potable water application
- Lead free - no lead 125LB seamless threaded red brass nipples - 2200
- The chemical analysis is 85% copper and 15% zinc
-
UNSPSC40173301
-
Package Description1/PK
-
Standards/ApprovalsANSI B1.20.1|ANSI B687-96|NSF-61 Approved|MS51846|RoHS Compliant|Federal Specifications WWN-351|Federal Government 5.3874|Federal Public Law 111-380|California AB 1953|Maryland HB-372|Louisiana Act No. 362|Vermont Statute|Title 9 Chapter 63: 247h|ASTM B43/ASTM B687-96|PROP65: This product can expose you to chemicals, including lead, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov
-
Catalog
Recently Viewed
HCI Preferred Supplier 40007 Standard Pipe Nipple, 1/8 in Nominal, 4 in L, Brass, NPT End Style
HCI Preferred Supplier 40007 Standard Pipe Nipple, 1/8 in Nominal, 4 in L, Brass, NPT End Style
Weiler® 21247 Power Tube Brush, 3/4 in Dia x 2-1/2 in L, 5-1/2 in OAL, 0.008 in Dia Filament/Wire, Steel Fill
Weiler® 21247 Power Tube Brush, 3/4 in Dia x 2-1/2 in L, 5-1/2 in OAL, 0.008 in Dia Filament/Wire, Steel Fill
HCI Preferred Supplier FSO240816 O-Ring Plug, 1 in x 1-7/16-12 Nominal, ORFS, Steel
HCI Preferred Supplier FSO240816 O-Ring Plug, 1 in x 1-7/16-12 Nominal, ORFS, Steel
W-1-3/4 INA BEARING COMPANY
THRUST BALL BEARING-W13/4>
The Lag Shield™ is a screw style anchor designed for use with lag bolts. It is suitable for use in concrete and the mortar joints of block or brick walls. In harder masonry materials, short style Lag Shield™ are used to reduce drilling time. The long style version is used in soft or weak masonry to better develop strength. The Lag Shield™ is not recommended for overhead or life safety applications.
JACKSON SAFETY® 16376 W30 Fixed Shade Cartridge Lens, 11 Lens Shade, Black, Plastic, 5-1/2 in H 0.8 in W 3-1/4 in THK Window
Jackson Safety* 16376 W30 Fixed Shade Cartridge Lens, 11 Lens, 5-1/2 in H x 0.8 in W x 3-1/4 in THK Window
