HCI Preferred Supplier 40063 Standard Pipe Nipple, 1/2 in Nominal, 2-1/2 in L, Brass, NPT End Style
HCI Preferred Supplier 40063 Standard Pipe Nipple, 1/2 in Nominal, 2-1/2 in L, Brass, NPT End Style
-
BrandGeneric
-
Manufacturer Part Number40063
-
CountryUSA
-
Temperature Rating100 to 400 deg F
-
MaterialBrass
-
Pressure Rating900 psi at 100 deg F/900 psi at 200 deg F/790 psi at 300 deg F/340 psi at 400 deg F
-
TypeStandard
-
Nominal Size1/2 in
-
Domestic/ImportImport
-
Length2-1/2 in
-
End StyleNPT
-
Method of ManufactureSeamless
-
ColorRed
-
Dimensions0.626 in ID x 0.84 in OD x 0.107 in THK
- Meets legislation for potable water application
- Lead free - no lead 125LB seamless threaded red brass nipples - 2200
- The chemical analysis is 85% copper and 15% zinc
-
UNSPSC40173301
-
Package Description25/BX
-
Standards/ApprovalsANSI B1.20.1|ANSI B687-96|NSF-61 Approved|MS51846|RoHS Compliant|Federal Specifications WWN-351|Federal Government 5.3874|Federal Public Law 111-380|California AB 1953|Maryland HB-372|Louisiana Act No. 362|Vermont Statute|Title 9 Chapter 63: 247h|ASTM B43/ASTM B687-96|PROP65: This product can expose you to chemicals, including lead, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov
-
Catalog
-
Full Engineering Drawing
Recently Viewed
HCI Preferred Supplier 40063 Standard Pipe Nipple, 1/2 in Nominal, 2-1/2 in L, Brass, NPT End Style
HCI Preferred Supplier 40063 Standard Pipe Nipple, 1/2 in Nominal, 2-1/2 in L, Brass, NPT End Style
FILTER
Coilhose® N14-12 Coiled Air Hose, 1/4 in Nominal, 1/4 in MPT Rigid End Style, 12 ft L, 185 psi at 70 deg F Working, Nylon, Domestic
Coilhose® N14-12 Coiled Air Hose, 1/4 in Nominal, 1/4 in MPT Rigid End Style, 12 ft L, 185 psi at 70 deg F Working, Nylon, Domestic
Anvil® 0310089008 FIG 1125 Auxiliary Air Regulator Reducer, Coupling, 2 x 1-1/2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
2-11/16"-ID 2-BOLT PILLOW BLOCK UNIT - JNEJA2211>
T-3-1/4" MINIATURE BAYONET BASE BULB
