NIBCO 3/4" X 1" SCH-40 BULLHEAD TEE NIB 401-102
NIBCO® 401-102 Bullhead Tee, 3/4 x 3/4 x 1 in Nominal, Slip End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
-
BrandLasco®
-
UPC025528713850
-
Manufacturer Part Number401-102
-
CountryUSA
-
Temperature Rating140 deg F
-
MaterialPVC
-
Fitting/Connector TypeTee
-
Pressure Class125 lb
-
Method of ManufactureInjection-Molded
-
ColorWhite
-
TypeBullhead
-
Schedule RatingSCH 40/STD
-
Nominal Size3/4 x 3/4 x 1 in
-
Seal MaterialNitrile Rubber
-
Domestic/ImportDomestic
-
End StyleSlip
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM D-2466: Socket type poly vinyl chloride (PVC) plastic pipe fittings, SCH 40/STD
- ASTM F-1970: Standard specification for special engineered fittings, appurtenances or valves for use in poly vinyl chloride (PVC) or chlorinated poly vinyl chloride (CPVC) systems
- Material: Lasco® SCH 40/STD fittings are produced from PVC type 1, cell classification 12454-B
- NSF/ANSI standard 61, Annex G: Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953) NSF/ANSI Standard 14: Plastics piping system components and related materials, includes ANSI standard 61, Annex G
- Not to be used in the hot or cold water distribution system in a dwelling
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40174608
-
Package Description50/CT
-
Standards/ApprovalsASTM D1784|ASTM D2466|ASTM F1970|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
WarrantyLimited
-
Specification Sheet
-
Catalog
Recently Viewed
NIBCO® 401-102 Bullhead Tee, 3/4 x 3/4 x 1 in Nominal, Slip End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
BLACK NYLON BAG-PSPPYRBAG>
Gates® Power Transmission Super HC® Molded Notch PowerBand® 5/5VX1060 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 106 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Browning® 1297035 Sheave Idler, 1 Grooves, 1 in Dia Bore, 3.96 in OD, 0.88 in W Face
Browning® 1297035 Sheave Idler, 1 Grooves, 1 in Dia Bore, 3.96 in OD, 0.88 in W Face
X-LARGE PREMIUM GRADE PIGSKIN KEYSTONE THUMB DRIVERS GLOVES - GLV3411XL>
1/4 -MALE PIPE THREADX5 BLACK NIPPLE
