Charlotte PVC 02401 2900, Tee, 3/4 x 3/4 x 1/2 in nominal, Socket x Socket x FNPT end style, SCH 40/STD, PVC, Domestic
PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than
-
BrandCharlotte
-
UPC611942039111
-
Manufacturer Part NumberPVC 02401 2900
-
CountryUSA
-
Temperature Rating140 deg F
-
MaterialPVC
-
Fitting/Connector TypeTee
-
Pressure Rating150 psi
-
ColorWhite
-
Schedule RatingSCH 40/STD
-
Nominal Size3/4 x 3/4 x 1/2 in
-
Domestic/ImportDomestic
-
Length3-1/8 in
-
End StyleSocket x Socket x FNPT
- PVC Schedule 40 fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140 F
- It is non-toxic, lightweight and easy to install
| Competitor Name | Cross-Reference Number |
|---|---|
| Ferguson | P40SFTFFD |
-
UNSPSC40174608
-
Package DescriptionEACH
-
Standards/ApprovalsASTM D1784|ASTM D2466|NSF 14/61
-
WarrantyLimited Warranty
-
SDS
-
Warranty Information
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Charlotte PVC 02401 2900, Tee, 3/4 x 3/4 x 1/2 in nominal, Socket x Socket x FNPT end style, SCH 40/STD, PVC, Domestic
PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than
Gates® Power Transmission Super HC® Molded Notch PowerBand® 12/3VX1250 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 125 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Alemite® 1637-B1 45 deg Thread Fitting, 1/4-28 Taper Thread, 13/16 in OAL, 13/64 in L Shank, Trivalent Zinc Plated
Alemite® 1637-B1 45 deg Thread Fitting, 1/4-28 Taper Thread, 13/16 in OAL, 13/64 in L Shank, Trivalent Zinc Plated
28-OUNCE CONSTRUCTION ADHESIVE-JWH269006 >
Browning® Classical Gripbelt® 3693793 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 12.68 in OD, 12.2 in (A)/12.7 in (B)/12-1/2 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693793 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 12.68 in OD, 12.2 in (A)/12.7 in (B)/12-1/2 in (BV) Dia Pitch, 1 in W Face
Browning® 767733 VPLS 100 Intermediate Duty Pillow Block Ball Bearing, 7/8 in Dia Bore, 3-23/32 to 4-17/32 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 5-1/2 in OAL x 2-11/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
