Lasco® 402-210 Reducing Tee, 1-1/2 x 1-1/2 x 3/4 in Nominal, Socket x Socket x FNPT End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
Lasco® 402-210 Reducing Tee, 1-1/2 x 1-1/2 x 3/4 in Nominal, Socket x Socket x FNPT End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
-
BrandLasco®
-
UPC025528723712
-
Manufacturer Part Number402-210
-
CountryUSA
-
Temperature Rating140 deg F
-
MaterialPVC
-
Fitting/Connector TypeTee
-
Pressure Class125 lb
-
Method of ManufactureInjection-Molded
-
ColorWhite
-
Schedule RatingSCH 40/STD
-
Nominal Size1-1/2 x 1-1/2 x 3/4 in
-
Seal MaterialNitrile Rubber
-
Domestic/ImportDomestic
-
End StyleSocket x Socket x FNPT
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM D-2466: Socket type poly vinyl chloride (PVC) plastic pipe fittings, SCH 40/STD
- ASTM F-1970: Standard specification for special engineered fittings, appurtenances or valves for use in poly vinyl chloride (PVC) or chlorinated poly vinyl chloride (CPVC) systems
- Material: Lasco® SCH 40/STD fittings are produced from PVC type 1, cell classification 12454-B
- NSF/ANSI standard 61, Annex G: Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953) NSF/ANSI Standard 14: Plastics piping system components and related materials, includes ANSI standard 61, Annex G
- Not to be used in the hot or cold water distribution system in a dwelling
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40174608
-
Package Description25/CT
-
Standards/ApprovalsASTM D1784|ASTM D2466|ASTM F1970|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
Specification Sheet
-
Catalog
Recently Viewed
Lasco® 402-210 Reducing Tee, 1-1/2 x 1-1/2 x 3/4 in Nominal, Socket x Socket x FNPT End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
Lasco® 402-210 Reducing Tee, 1-1/2 x 1-1/2 x 3/4 in Nominal, Socket x Socket x FNPT End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
Gates® Power Transmission Super HC® Molded Notch PowerBand® 10/5VX1600 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 160 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Coilhose® 616-S 600 Blow Gun, Extended Safety Tip, 150 psi Working, 16 in L Tube, 1/4 in FNPT Inlet x 1/8 in FNPT Outlet Thread, Die Cast Zinc, Domestic
The 600 series blow guns are a thumb lever style blow gun with an ergonomic shape and accept all Coilhose® 1/8 in tips. User comfort was designed into the 600 series with the elimination of the valve where the user's fingers are placed. Models that are designated as "safety" conform to OSHA standards for noise levels (1910.95) and 30 psi dead end pressure (1910.242B).
Gates® Power Transmission Super HC® PowerBand® 4/5V800 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 80 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
MCR Safety 3485L 3485 Insulating General Purpose Gloves, Driver, Gunn Cut/Keystone Thumb Style, Pigskin Leather Palm, Hi-Viz Orange/Silver, Slip-On Cuff, Thermosock® Lining
MCR Safety 3485L 3485 Insulating General Purpose Gloves, Driver, Gunn Cut/Keystone Thumb Style, Pigskin Leather Palm, Hi-Viz Orange/Silver, Slip-On Cuff, Thermosock® Lining
