NIBCO 1-1/4" X 3/4" S80 SXS PVC COUPLING NIB 829-167
NIBCO® 829-167 Reducing Coupling, 1-1/4 x 3/4 in Nominal, Slip End Style, SCH 80/XH, PVC, Fluorocarbon Elastomer Seal, Domestic
-
BrandLasco®
-
UPC025528796471
-
Manufacturer Part Number829-167
-
CountryUSA
-
MaterialPVC
-
Fitting/Connector TypeCoupling
-
Method of ManufactureInjection-Molded
-
Schedule RatingSCH 80/XH
-
Nominal Size1-1/4 x 3/4 in
-
Seal MaterialFluorocarbon Elastomer
-
Domestic/ImportDomestic
-
End StyleSlip
- Sized with bushing
- ASTM D1784 - Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds, class 23447
- NSF/ANSI standard 61, Annex G - Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953) NSF/ANSI standard 14 - plastics piping system components and related materials
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
-
UNSPSC40174908
-
Package Description25/CTN
-
Standards/ApprovalsANSI Annex-G|ASTM D1784|NSF/ANSI 14/61
-
WarrantyLimited
-
Specification Sheet
Recently Viewed
NIBCO® 829-167 Reducing Coupling, 1-1/4 x 3/4 in Nominal, Slip End Style, SCH 80/XH, PVC, Fluorocarbon Elastomer Seal, Domestic
Makita® 743012-7 Grinder Style Bulk Backing Pad, 7 in Dia Pad
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
JAS300H100 >
Jacobs® Multi-Craft® 30247D Drill Chuck, 0.062 to 0.375 in Capacity, 3/8-24 Mounting, Plain Bearing, KG1 Key
The Multi-Craft® drill chuck is mounted as original equipment on more drills than any other chuck by both domestic and import drill manufacturers.
SIZE 10/11 LARGE SHOE COVERS-WIK04 >
JASON 690-J-12 12 RIB POLY-V V-BELTS, METERIC ANSI POLY-V BELT, J TOOTH PROFILE, 12 RIBS, 69 " LONG, 0.092 " PITCH
POLYESTER TENSILE MATERIAL; RUBBER OUTER MATERIAL MULTI-RIB V-BELT
12-RIB POLY-V V-BELTS -JAS690J12 >
