NIBCO 2" SCH-80 PVC SXS PLASTIC COUPLING NIB 829-020
The NIBCO 829020 (often stylized as 829-020) is a 2-inch Schedule 80 PVC straight pipe coupling designed for high-pressure fluid applications. It is used to connect two sections of 2-inch PVC pipe traveling in the same direction.
-
BrandLasco®
-
UPC025528720414
-
Manufacturer Part Number829-020
-
CountryUSA
-
Temperature Rating73 deg F
-
MaterialPVC
-
Fitting/Connector TypeCoupling
-
Method of ManufactureInjection-Molded
-
ColorGray
-
Schedule RatingSCH 80/XH
-
Nominal Size2 in
-
Domestic/ImportDomestic
-
Length3-5/16 in
-
End StyleSlip
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM D-2464: Threaded poly vinyl chloride (PVC) plastic pipe fittings SCH 80/XH
- ASTM D-2467: Socket type poly vinyl chloride (PVC) plastic pipe fittings
- NSF/ANSI standard 61, Annex G: Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953)
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40172608
-
Package Description10/CTN
-
Standards/ApprovalsASTM D1784|ASTM D2464|ASTM D2467|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
WarrantyLimited
-
Specification Sheet
-
Catalog
Recently Viewed
The NIBCO 829020 (often stylized as 829-020) is a 2-inch Schedule 80 PVC straight pipe coupling designed for high-pressure fluid applications. It is used to connect two sections of 2-inch PVC pipe traveling in the same direction.
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
A superior industrial spray paint formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag, and gives twice the coverage of conventional spray paints. Can be applied to bare metal, but for maximum protection, use our MRO red iron oxide primer (620-1407) or light gray primer (620-1431). Resists oil, gas, heat, and sunlight.
5" COARSE 60-GRIT ADHESIVE-BACKED SANDING DISC--4 PACK - JWH301345 >
7" X 7/8" 36-GRIT FIBER DISC-PEAFD7036X >
The quality of cutting and grinding wheels depends on several factors - the grain (size, shape and quality) determines how aggressive a wheel is. The right mix of bonding resins, additives and fiberglass reinforcement determines the wheel life. Metabo® cutting and grinding wheels are designed and manufactured in accordance with our most stringent specifications so that they, in combination with our power tools, achieve the best performance and productivity, saving time and money.
