NIBCO® 830-020, 2 in nominal, FNPT end style, SCH 80/XH, PVC, Domestic
a 2-inch Schedule 80 PVC Female Pipe Thread (FPT x FPT) Coupling. FPT x FPT (Female National Pipe Thread on both ends, also referred to as FNPT or FIPT).
-
BrandLasco®
-
UPC025528720612
-
Manufacturer Part Number830-020
-
CountryUSA
-
Temperature Rating73 deg F
-
MaterialPVC
-
Fitting/Connector TypeCoupling
-
Method of ManufactureInjection-Molded
-
ColorGray
-
Schedule RatingSCH 80/XH
-
Nominal Size2 in
-
Dimensions3 in Dia
-
Domestic/ImportDomestic
-
Length3-5/16 in
-
End StyleFNPT
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM D-2464: Threaded poly vinyl chloride (PVC) plastic pipe fittings SCH 80/XH
- ASTM D-2467: Socket type poly vinyl chloride (PVC) plastic pipe fittings
- NSF/ANSI standard 61, Annex G: Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953)
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40172608
-
Package Description10/CTN
-
Standards/ApprovalsASTM D1784|ASTM D2464|ASTM D2467|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
WarrantyLimited
-
Specification Sheet
-
Catalog
Recently Viewed
a 2-inch Schedule 80 PVC Female Pipe Thread (FPT x FPT) Coupling. FPT x FPT (Female National Pipe Thread on both ends, also referred to as FNPT or FIPT).
3-3/16" PTO ADAPTER & INCREASERS-HIG00253>
Gates® Power Transmission MegaCrimp™ 12G-14FJX G25 Straight Hydraulic Coupling, 3/4 in x 1-3/16-12 Nominal, Hose x 37 deg Female JIC Flare Swivel, Carbon Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
20 TO 21 PTO ADAPTER-HIG03036>
United Abrasives-SAIT 23102 Type 1 Burr Free Portable Saw Cut-Off Wheel, 4-1/2 in Dia x 5/64 in THK, 7/8 in Center Hole, A30S Grit, Aluminum Oxide Abrasive
PTO DRIVE YOKE PIN ASSEMBLIES-HIG01090>
