NIBCO 3" PVC SCH-80 GLUE-ON CAPS NIB 847-030
LascoĀ® 847-030 Cap, 3 in Nominal, Slip End Style, SCH 80/XH, PVC, Domestic
-
BrandLascoĀ®
-
UPC025528721725
-
Manufacturer Part Number847-030
-
CountryUSA
-
MaterialPVC
-
Fitting/Connector TypeCap
-
Method of ManufactureInjection-Molded
-
ColorGray
-
Schedule RatingSCH 80/XH
-
Nominal Size3 in
-
Domestic/ImportDomestic
-
End StyleSlip
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM D-2467: Socket type poly vinyl chloride (PVC) plastic pipe fittings, SCH 80/XH
- NSF/ANSI standard 61, Annex G: Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953) NSF/ANSI Standard 14: Plastics piping system components and related materials, includes ANSI standard 61, Annex G
- Do not use LascoĀ® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by LascoĀ®
- Fitting modification voids the warranty
-
UNSPSC40172408
-
Package Description5/CT
-
Standards/ApprovalsASTM D1784|ASTM D2467|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
WarrantyLimited
-
Specification Sheet
-
Catalog
Recently Viewed
LascoĀ® 847-030 Cap, 3 in Nominal, Slip End Style, SCH 80/XH, PVC, Domestic
JustriteĀ® 14265 Liquid Disposal Safety Can With Stainless Steel Hardware, 2 gal Capacity, 12 in Dia, 14-3/4 in H, Polyethylene, Red, FM Approved, OSHA Approved
A better solution for the containment of liquid flammable or corrosive waste. High-density polyethylene (HDPE) disposal cans provide superior chemical resistance and leak protection. Spring-loaded sealed cap, normally closed, automatically vents between 3 and 5 psig (0.2 and 0.35 bar). Stainless steel handle and hardware with latch-catch system hold the cap in the open position for easy filling and pouring. Large-mouth opening features a built-in stainless steel flame arrester to guard against outside ignition. Current-carrying, patented carbon insert embedded in the container allows for proper grounding. The broad-base design provides stability and resists accidental tip over. Model 14265 with built-in polyethylene fill gauge indicator pops up to warn you that the container is almost full. For the safe containment and storage of liquid flammable or corrosive waste in industries like chemical and lab.
HCI Preferred Supplier 20054C Connector, 1/4 x 1/8 in Nominal, Push-In x MNPT, 0 to 150 psi Pressure, Brass/Composite Polyacetal
HCI Preferred Supplier 20054C Connector, 1/4 x 1/8 in Nominal, Push-In x MNPT, 0 to 150 psi Pressure, Brass/Composite Polyacetal
HCI Preferred Supplier 640068 Connector, 9/16-18 x 3/4-16 Nominal, SAE Male JIC Flare x Male ORB, Steel
HCI Preferred Supplier 640068 Connector, 9/16-18 x 3/4-16 Nominal, SAE Male JIC Flare x Male ORB, Steel
The Square Dā¢ by Schneider Electric brand heavy duty safety switch is designed to be tough, reliable and provide exceptional performance in the most gruelling conditions from commercial and institutional to industrial and manufacturing facilities. F Series safety switches provide significantly higher levels of mechanical endurance than NEMA KS-1 or UL98 standards require. The design life of a F Series switch is a minimum of three times the NEMA requirement. An abundance of copper is used in the heaviest current carrying power paths of all Square Dā¢ by Schneider Electric heavy duty safety switches. The more copper for current carrying paths, the lower the temperature rise. Managing temperatures inside the switch is the key to providing greater service life. All heavy duty safety switches feature a quick-make, quick-break operating mechanism, a dual cover interlock and a color coded indicator handle.
JustriteĀ® 09700 Foot Operated Oily Waste Can, 21 gal Capacity, 18-3/8 in Dia 23-7/16 in H, Galvanized Steel, Red
Dispose of oil-soaked rags and prevent fires caused by stray sparks or spontaneous combustion. Rags and cloths soaked with solvents, thinners, linseed oil, combustible adhesives and other flammable liquids present a serious fire risk when improperly discarded. Lid opens to no more than 60 degrees and stays closed when not in use, isolating contents from fire sources and limiting oxygen to virtually eliminate the risk of spontaneous combustion. Round construction and elevated base allow circulation of air around can to disperse heat and reduce moisture build-up and rusting. Durable steel construction with a powder-coat finish provides chemical resistance. Lid opens no more than a 60Āŗ angle as required by UL. Approved by FM, UL, and TĆV. All cans carry a ten-year warranty. For the safe collection and storage of oil-soaked materials, reducing fire risks and promoting workplace safety and environmental responsibility in industries, such as automotive, manufacturing and construction.
