Lasco® 439-052 Reducing Bushing, 3/8 x 1/4 in Nominal, MNPT x FNPT End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
Lasco® 439-052 Reducing Bushing, 3/8 x 1/4 in Nominal, MNPT x FNPT End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
-
BrandLasco®
-
UPC025528712372
-
Manufacturer Part Number439-052
-
CountryUSA
-
Temperature Rating140 deg F
-
MaterialPVC
-
Fitting/Connector TypeBushing
-
Method of ManufactureInjection-Molded
-
ColorWhite
-
Schedule RatingSCH 40/STD
-
Nominal Size3/8 x 1/4 in
-
Seal MaterialNitrile Rubber
-
Domestic/ImportDomestic
-
End StyleMNPT x FNPT
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM F-1970: Standard specification for special engineered fittings, appurtenances or valves for use in poly vinyl chloride (PVC) or chlorinated poly vinyl chloride (CPVC) systems
- Material: Lasco® SCH 40/STD fittings are produced from PVC type 1, cell classification 12454-B
- NSF/ANSI standard 61, Annex G: Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953) NSF/ANSI Standard 14: Plastics piping system components and related materials, includes ANSI standard 61, Annex G
- Not to be used in the hot or cold water distribution system in a dwelling
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40172308
-
Package Description50/CT
-
Standards/ApprovalsASTM D1784|ASTM F1970|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
Catalog
-
Specification Sheet
Recently Viewed
Lasco® 439-052 Reducing Bushing, 3/8 x 1/4 in Nominal, MNPT x FNPT End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
Lasco® 439-052 Reducing Bushing, 3/8 x 1/4 in Nominal, MNPT x FNPT End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
1-1/4" -ID LOW PILLOW BLOCK UNIT-FYHEBSL20720 >
Browning® Classical Gripbelt® 3195104 AK Series Type 3 Single Groove Sheave, Finished Bore, 1-1/8 in Dia Bore, 4.45 in OD, 4.4 in (A)/3.86 in (3L) Dia Pitch, 3/4 in W Face
Browning® Classical Gripbelt® 1028554 BK Series Type 3 Single Groove Sheave, Finished Bore, 1-1/8 in Dia Bore, 5-1/4 in OD, 4.7 in (A)/5.2 in (B) Dia Pitch, 7/8 in W Face
IDC Select® IDC AK084-5/8 Light Duty Type 3 Single Groove Sheave With 3/16 x 3/32 in Keyway and Setscrew, Bored to Size Bore, 5/8 in Dia Bore, 8-1/4 in OD, 8 in Dia Pitch, 3/4 in W Face
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
Browning® Classical Gripbelt® 1027184 AK Series Type 3 Single Groove Sheave, Finished Bore, 1-7/16 in Dia Bore, 7-1/4 in OD, 7.2 in (A)/6.66 in (3L) Dia Pitch, 3/4 in W Face
