NIBCO 1/2" X 1/4" SCH-80 PVC SXS BUSHING NIB 837-072
Material: Schedule 80 Polyvinyl Chloride (PVC), dark gray. Size: 1/2" x 1/4" (reduces a 1/2" line down to a 1/4" line). Connection Type: Spigot x Socket (Spig x SxS).The outer 1/2" connection is a Spigot (male smooth end, same outer diameter as a pipe) to fit inside a 1/2" socket fitting. The inner 1/4" connection is a Socket (female smooth end) to accept a 1/4" pipe.
-
BrandLasco®
-
UPC025528720858
-
Manufacturer Part Number837-072
-
CountryUSA
-
MaterialPVC
-
Fitting/Connector TypeBushing
-
Method of ManufactureInjection-Molded
-
ColorGray
-
TypeFlush
-
Schedule RatingSCH 80/XH
-
Nominal Size1/2 x 1/4 in
-
Domestic/ImportDomestic
-
End StyleSpigot x Slip
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM D-2467: Socket type poly vinyl chloride (PVC) plastic pipe fittings, SCH 80/XH
- NSF/ANSI standard 61, Annex G: Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953) NSF/ANSI Standard 14: Plastics piping system components and related materials, includes ANSI standard 61, Annex G
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40172308
-
Package Description25/CT
-
Standards/ApprovalsASTM D1784|ASTM D2467|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
WarrantyLimited
-
Specification Sheet
-
Catalog
Recently Viewed
Material: Schedule 80 Polyvinyl Chloride (PVC), dark gray. Size: 1/2" x 1/4" (reduces a 1/2" line down to a 1/4" line). Connection Type: Spigot x Socket (Spig x SxS).The outer 1/2" connection is a Spigot (male smooth end, same outer diameter as a pipe) to fit inside a 1/2" socket fitting. The inner 1/4" connection is a Socket (female smooth end) to accept a 1/4" pipe.
NIBCO® 838-250 Flush Reducing Bushing, 2 x 1-1/4 in Nominal, Spigot x FNPT End Style, SCH 80/XH, PVC, Domestic
Anvil® 0310000807 FIG 1101 Standard 90 deg Pipe Elbow, 1/2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
714061 DO-IT-BEST/CHAPIN DELUXE 70 LB. CAPACITY RESIDENTIAL BORADCAST PUSH SPREADER
EVEN DISTRIBUTION AND SPREAD PATTERN. ENCLOSED ACETAL GEAR SYSTEM. ADJUSTABLE GATE WITH 30 SETTINGS.
-JWH714061>
HCI Preferred Supplier 44105LF Imperial 90 deg Pipe Elbow, 1 in Nominal, Bronze
HCI Preferred Supplier 44105LF Imperial 90 deg Pipe Elbow, 1 in Nominal, Bronze
3/4" X 48" FLEXIBLE GAS LINE-JWH450407>
