Charlotte PVC 00107 1800 Flush, 4 x 3 in nominal, Spigot x Hub end style, SCH 40/STD, PVC, Domestic
PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140° F. PVC is lightweight and
-
BrandCharlotte
-
UPC611942032679
-
Manufacturer Part NumberPVC 00107 1800
-
CountryUSA
-
Temperature Rating73 deg F
-
MaterialPVC
-
Fitting/Connector TypeBushing
-
Pressure Rating150 psi
-
Method of ManufactureFabricated
-
ColorWhite
-
TypeFlush
-
Schedule RatingSCH 40/STD
-
Nominal Size4 x 3 in
-
Domestic/ImportDomestic
-
End StyleSpigot x Hub
- Easy to install
- PVC is lightweight, requires no special tools for cutting and is installed by solvent cementing
-
UNSPSC40172308
-
Package DescriptionEACH
-
Standards/ApprovalsASTM D1784|ASTM D2665|ASTM D3311|NSF Standard 14
-
WarrantyLimited
-
SDS
-
Warranty Information
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Charlotte PVC 00107 1800 Flush, 4 x 3 in nominal, Spigot x Hub end style, SCH 40/STD, PVC, Domestic
PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140° F. PVC is lightweight and
Lasco® 807-015, 1-1/2 in nominal, Socket x FNPT end style, SCH 80/XH, PVC, Domestic
Lasco® 807-015, 1-1/2 in nominal, Socket x FNPT end style, SCH 80/XH, PVC, Domestic
Lasco® Fittings, Inc's comprehensive line of PVC injection molded fittings offers a variety of configurations in sizes 3/8 in through 12 in. SCH 80/XH fittings are manufactured to ASTM D 2467.
Lasco® 807-010 Elbow, 1 in Nominal, Socket x FNPT End Style, SCH 80/XH, PVC, Domestic
Lasco® 807-010 Elbow, 1 in Nominal, Socket x FNPT End Style, SCH 80/XH, PVC, Domestic
Spears® 8098-025, 2-1/2 in nominal, FNPT end style, SCH 80/XH, PVC, EPDM O-Ring seal, Domestic
All PVC SCH 80/XH fittings shall be produced by Spears® manufacturing company from PVC type I, cell classification 12454, conforming to ASTM Standard D1784. All injection molded PVC SCH 80/XH fittings shall be certified for potable water service by NSF® international manufactured in strict compliance to ASTM D2467. All fabricated fittings shall be produced in accordance with Spears® general specifications for fabricated fittings. All PVC flanges shall be designed and manufactured to meet CL150 bolt pattern per ANSI Standard B16.5 and rated for a maximum internal pressure of 150 psi, non-shock at 73 deg F.
Lasco® 806-100 Elbow, 10 in Nominal, Slip End Style, SCH 80/XH, PVC, Domestic
Lasco® Fittings, Inc's comprehensive line of PVC injection molded fittings offers a variety of configurations in sizes 3/8 in through 12 in. SCH 80/XH fittings are manufactured to ASTM D 2467.
