Dixon® TN43 Tuff-Lite™ Hose Insert, 3/8 x 1/2 in Nominal, MNPT x Hose Shank End Style, Nylon, Domestic
Dixon® TN43 Tuff-Lite™ Hose Insert, 3/8 x 1/2 in Nominal, MNPT x Hose Shank End Style, Nylon, Domestic
-
BrandDixon®
-
Manufacturer Part NumberTN43
-
CountryUSA
-
MaterialNylon
-
Fitting/Connector TypeAdapter
-
ColorWhite
-
Nominal Size3/8 x 1/2 in
-
Hex Size3/4 in
-
SeriesTuff-Lite™
-
Domestic/ImportDomestic
-
Length1-3/4 in
-
End StyleMNPT x Hose Shank
- Nylon should not be used with compressed gas
- Nylon fittings should not be used with acid-based fertilizers, bromine, chlorine, fluorine, hydrochloric acid, iodine, nitric acid, phosphoric acid, sulfuric acid or xylene
- Warning this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
-
UNSPSC40141734
-
Package Description50/BX
-
Catalog
-
Full Engineering Drawing
Recently Viewed
Dixon® TN43 Tuff-Lite™ Hose Insert, 3/8 x 1/2 in Nominal, MNPT x Hose Shank End Style, Nylon, Domestic
Dixon® TN43 Tuff-Lite™ Hose Insert, 3/8 x 1/2 in Nominal, MNPT x Hose Shank End Style, Nylon, Domestic
Crescent® R212CV 8-Position Tongue and Groove Plier, ASME B107.23M-2004, 2-1/4 in Nominal, Alloy Steel Straight Jaw, 12 in OAL
Crescent® R212CV 8-Position Tongue and Groove Plier, ASME B107.23M-2004, 2-1/4 in Nominal, Alloy Steel Straight Jaw, 12 in OAL
HCI Preferred Supplier 44103LF Imperial 90 deg Pipe Elbow, 1/2 in Nominal, Bronze
HCI Preferred Supplier 44103LF Imperial 90 deg Pipe Elbow, 1/2 in Nominal, Bronze
Gates® Power Transmission PowerGrip® 750H300 Heavy Timing Belt, 3 in W, 75 in OAL, 1/2 in Pitch, 150 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Gates® Power Transmission MegaCrimp™ 12MJ-12MP90 G60 SAE to SAE Hydraulic Elbow Adapter, 1-1/16-12 x 3/4-14 Nominal, 37 deg Male JIC Flare x Male NPTF, Steel, Import
Gates® MegaCrimp™ couplings are designed for use with Gates® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp™ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
