Anvil® 0310085006 FIG 1125 Reducer, Coupling, 3/8 x 1/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
-
BrandAnvil®
-
UPC690291348358
-
Manufacturer Part Number0310085006
-
CountryUSA
-
Temperature Rating-20 to 150 deg F
-
FinishBlack Oxide
-
MaterialMalleable Iron
-
Fitting/Connector TypeCoupling
-
Pressure Class150 lb
-
Pressure Rating300 psi
-
Schedule RatingSCH 40/STD
-
Nominal Size3/8 x 1/4 in
-
SeriesFIG 1125
-
Domestic/ImportDomestic
-
Length1-1/8 in
-
End StyleFNPT
-
ColorBlack
-
Dimensions1.13 in W
- Malleable iron pipe fittings hold two different pipe parts together and direct gas and liquid movement.
- Wide range of products for sprinkler systems, drainage systems other installations, including fittings connectors, unions, plugs & bushings, clamps and more
- Accurate form, length and straightness on threads for easy engagement
- Chamfered openings for fast, easy engagement and assembly
- Precision machining
- Rust-Resistant coating
- 0.32 in small end x 0.36 in large end thread length
- 0.16 in take out
- 0.84 in small end band outside diameter x 1.01 in large end band outside diameter
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 66252 |
-
UNSPSC40173606
-
Package Description25/PK
-
Standards/ApprovalsASME B16.3|cULus Listed|FM Approved|NSF/ANSI 61|ASME B16.14/B16.4/B1.20.1|ANSI B1.20.1|FM Approved|NSF 61-G|UL/ULC Listed
-
Alternative Part NumberCXB.BMC
-
Specification Sheet
Recently Viewed
Anvil® 0310085006 FIG 1125 Reducer, Coupling, 3/8 x 1/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
LINEAR BEARING-INAKBZ16PP>
Big Jake BJ238JHX5 BJ238JH 1-Piece Rain Coat, Men's, X5, Fluorescent Lime, PVC, Resists: Water/Flame, ANSI 107 Class 3, Drawstring Hood
Wear indicator, Sweet! one advantage to this this double dipped black over blue construction is that it supplies you with a built-in wear indicator. When you see the blue second dip showing through the black, then its time to replace the gloves. The 6962 features a 12 in cuff, brushed interlock liner, and a sandy finish. It provides protection against abrasion, scrapes and hazardous chemicals.
Newstripe aerosol disposal system - NEW10004840>
Gates® Power Transmission MegaCrimp™ 4G-5FJX90M G25 Medium Bent Tube Hydraulic Coupling, 1/4 in x 1/2-20 Nominal, Hose x 37 deg Female JIC Flare Swivel, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
